Hi Hugh,
Trace 4 shows that the wrong IP address is being presented at the
NAS:
Jun 7 11:06:33 contender /usr/bin/radiusd[588]: Adding session for
[EMAIL PROTECTED], 216.252.212.131, 20102
Jun 7 11:06:33 contender /usr/bin/radiusd[588]: Handling with
Radius::AuthRADIUS
Jun 7 11:06:33 contender /usr/bin/radiusd[588]: Packet dump: *** Sending
to 202.76.159.2 port 1646 .... Code: Accounting-Request
Identifier: 28
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes: ^IUser-Name = "dean" ^INAS-IP-Address = 216.252.212.131
^INAS-Port = 20102 ^INAS-Port-Type = Async ^IAcct-Status-Type = Start
^IAcct-Delay-Time = 0 ^IAcct-Session-Id = "326003717" ^IAcct-Authentic =
RADIUS ^ICalled-Station-Id = "95936899" ^IFramed-Protocol = PPP
^IFramed-IP-Address = 203.44.37.68 ^ITimestamp = 960339992
Jun 7 11:06:33 contender /usr/bin/radiusd[588]: Packet dump: *** Received
from 202.76.159.2 port 1646 .... Packet length = 20 05 1c 00 14 13 bd 06
ee a1 e6 93 66 ff 7c 59 26 2f e6 2d 76 Code: Accounting-Response
Identifier: 28
Authentic: <19><189><6><238><161><230><147>f<255>|Y&/<230>-v Attributes:
Jun 7 11:06:33 contender /usr/bin/radiusd[588]: Received reply in
AuthRADIUS for req 28 from 202.76.159.2:1646
Jun 7 11:06:33 contender /usr/bin/radiusd[588]: Packet dump: *** Sending
to 203.44.37.12 port 1034 .... Code: Accounting-Response
Identifier: 170
Authentic: [l`<136><199><181><182>h<31>><157>{<190><145><145><223>
Attributes:
Where should I be looking now?
Thanks
On Wed, 7 Jun 2000, Hugh Irvine wrote:
>
> Hello Dean -
>
> On Tue, 06 Jun 2000, Dean Brandt wrote:
> > Hi,
> >
> > I am trying to get differing ranges of IPs allocated to two
> > different sets of clients.
> >
> > I have this in my cfg:
> >
> > <Client xxx.xx.xx.xx>
> > Secret xxxxx
> > NoDefault
> > IgnoreAcctSignature
> > FramedGroupBaseAddress 203.1.1.1
> > FramedGroupBaseAddress 203.2.2.2
> > </Client>
> >
> > And then this in the Realm:
> >
> > <Realm my.net.au>
> > RewriteUsername s/^([^@]+).*/$1/
> > <AuthBy RADIUS>
> > Host 202.1.1.1
> > Secret xxxxxxxx
> > Framed-Group = 1
> > </AuthBy>
> > AcctLogFileName %L/detail.my
> > </Realm>
> >
> > When requests are proxied to the remote RADIUS server, the users
> > are still receiving IPs allocated from the NAS. If I turn that facility
> > off on the NAs then no one can log in. Is the above correct? Have I left
> > anything out?
> >
>
> What does a trace 4 show as being returned to the NAS? If the correct IP
> address is present and the NAS is not honouring it, then it is a NAS
> configuration issue.
>
> hth
>
> Hugh
>
>
--
Dean Brandt
Technical Director
Cain Internet Services Pty Ltd
ACN 091949405
Ph 61-3-95231065
Satellite Access - $29.95 - no limits
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.