We are planning to move our Radiator Radius from Linux to Windows 2000. I
need instruction on how to make Radiusd run as a service automatically.
'Tunde Ogedengbe
Linkserve Limited
22 Akin Adesola Street
Victoria Island
Lagos - Nigeria
Tel: +234 1 2623900
Fax: +234 1 2623906
URL: http://www.linkserve.net
----- Original Message -----
From: "Hugh Irvine" <[EMAIL PROTECTED]>
To: "'Tunde Ogedengbe" <[EMAIL PROTECTED]>
Sent: Tuesday, September 04, 2001 12:15 PM
Subject: Re: Re: (RADIATOR) SimultaneousUse
>
> Hello 'Tunde -
>
> There are two different files - one for debug messages (known as the
> log file), and the other for accounting information (known as the
> detail file). I need to see a copy of a trace 4 debug file as written
> to the log file (not an accounting detail file).
>
> thanks
>
> Hugh
>
>
>
> At 9:57 +0200 01/9/4, 'Tunde Ogedengbe wrote:
> >Hugh:
> >
> >I dont understand. It was the accounting output (detail) that I sent to
you
> >under trace 4 debug. Do you require a different trace level?
> >
> >'Tunde Ogedengbe
> >Linkserve Limited
> >22 Akin Adesola Street
> >Victoria Island
> >Lagos - Nigeria
> >Tel: +234 1 2623900
> >Fax: +234 1 2623906
> >URL: http://www.linkserve.net
> >----- Original Message -----
> >From: "Hugh Irvine" <[EMAIL PROTECTED]>
> >To: "'Tunde Ogedengbe" <[EMAIL PROTECTED]>
> >Sent: Monday, September 03, 2001 12:41 AM
> >Subject: Re: Re: (RADIATOR) SimultaneousUse
> >
> >
> >>
> >> Hello 'Tunde -
> >>
> >> Thanks for sending this, however it is the accounting output from the
> >> detail file, not a trace 4 debug. Could you please send me the trace
> >> 4 debug showing what is happening?
> >>
> >> thanks
> >>
> >> Hugh
> >>
> >>
> >>
> >> >Pls find below the sample details records for our connection:
> >> >
> >> >Sat Sep 1 15:15:08 2001
> >> >User-Name = "xxxxx"
> >> >NAS-IP-Address = x.x.x.x
> >> >Acct-Status-Type = Stop
> >> >Acct-Session-Id = "50332430"
> >> >Acct-Delay-Time = 0
> >> >Acct-Authentic = RADIUS
> >> >Service-Type = Framed-User
> >> >NAS-Port-Type = Async
> >> >NAS-Port = 769
> >> >USR-Modem-Training-Time = 16
> >> >USR-Interface-Index = 2025
> >> >USR-Chassis-Call-Slot = 4
> >> >USR-Chassis-Call-Span = 16
> >> >USR-Chassis-Call-Channel = 1
> >> >USR-Unauthenticated-Time = 7
> >> >Calling-Station-Id = ""
> >> >Called-Station-Id = ""
> >> >USR-Modulation-Type = v34
> >> >USR-Simplified-MNP-Levels = NONE
> >> >USR-Simplified-V42bis-Usage = NONE
> >> >USR-Connect-Speed = 28800_BPS
> >> >Framed-Protocol = PPP
> >> >Framed-IP-Address = x.x.x.x
> >> >Acct-Session-Time = 93
> >> >Acct-Terminate-Cause = User-Request
> >> >Acct-Input-Octets = 4685
> >> >Acct-Output-Octets = 1756
> >> >Acct-Input-Packets = 104
> >> >Acct-Output-Packets = 69
> >> >Timestamp = 999353708
> >> >
> >> >Sat Sep 1 15:15:09 2001
> >> >Acct-Session-Id = "3100131A"
> >> >User-Name = "xxxxx"
> >> >NAS-IP-Address = x.x.x.x
> >> >NAS-Port = 10
> >> >Acct-Status-Type = Start
> >> >Acct-Authentic = RADIUS
> >> >Service-Type = Framed-User
> >> >Framed-Protocol = PPP
> >> >Framed-IP-Address = x.x.x.x
> >> >Acct-Delay-Time = 0
> >> >Timestamp = 999353709
> >> >
> >> >Sat Sep 1 15:15:09 2001
> >> >User-Name = "xxxx"
> >> >NAS-IP-Address = x.x.x.x
> >> >Acct-Status-Type = Start
> >> >Acct-Session-Id = "328015"
> >> >Acct-Delay-Time = 0
> >> >Acct-Authentic = RADIUS
> >> >Service-Type = Framed-User
> >> >NAS-Port-Type = Async
> >> >NAS-Port = 6
> >> >USR-Modem-Training-Time = 11
> >> >USR-Interface-Index = 1262
> >> >USR-Chassis-Call-Slot = 1
> >> >USR-Chassis-Call-Span = 1
> >> >USR-Chassis-Call-Channel = 6
> >> >USR-Unauthenticated-Time = 4
> >> >Calling-Station-Id = ""
> >> >Called-Station-Id = ""
> >> >USR-Modulation-Type = v34
> >> >USR-Simplified-MNP-Levels = ccittV42SREJ
> >> >USR-Simplified-V42bis-Usage = ccittV42bis
> >> >USR-Connect-Speed = 19200_BPS
> >> >Framed-Protocol = PPP
> >> >Framed-IP-Address = x.x.x.x
> >> >Timestamp = 999353709
> >> >
> >> >Sat Sep 1 15:15:10 2001
> >> >User-Name = "xxx"
> >> >NAS-IP-Address = x.x.x.x
> >> >Acct-Status-Type = Start
> >> >Acct-Session-Id = "1638681"
> >> >Acct-Delay-Time = 0
> >> >Acct-Authentic = RADIUS
> >> >Service-Type = Framed-User
> >> >NAS-Port-Type = Async
> >> >NAS-Port = 26
> >> >USR-Modem-Training-Time = 22
> >> >USR-Interface-Index = 1282
> >> >USR-Chassis-Call-Slot = 1
> >> >USR-Chassis-Call-Span = 1
> >> >USR-Chassis-Call-Channel = 26
> >> >USR-Unauthenticated-Time = 6
> >> >Calling-Station-Id = ""
> >> >Called-Station-Id = ""
> >> >USR-Modulation-Type = v90Digital
> >> >USR-Simplified-MNP-Levels = ccittV42
> >> >USR-Simplified-V42bis-Usage = ccittV42bis
> >> >USR-Connect-Speed = 45333_BPS
> >> >Framed-Protocol = PPP
> >> >Framed-IP-Address = x.x.x.x
> >> >Timestamp = 999353710
> >> >
> >> >>
> >> >> Hello 'Tunde -
> >> >>
> >> >> Thanks for the configuration file, however I will also need to see
a
> >trace
> >> >4
> >> >> debug from Radiator showing the problem.
> > > >>
> >> >> thanks
> >> >>
> >> >> Hugh
> >> >>
> >> >>
> >> >> On Friday 31 August 2001 02:22, 'Tunde Ogedengbe wrote:
> >> >> > Hugh:
> >> >> >
> >> >> > See conf below:
> >> >> >
> >> >> > (radius.cfg)
> >> >> >
> >> >> > Foreground
> >> >> >
> >> >> > LogStdout
> >> >> >
> >> >> > Trace 3
> >> >> >
> >> >> > PidFile /usr/local/etc/raddb/radiusd.pid
> >> >> >
> >> >> > AuthPort 1645
> >> >> >
> >> >> > AcctPort 1646
> >> >> >
> >> >> > LogDir /usr/local/etc/raddb
> >> >> >
> >> >> > DbDir /usr/local/etc/raddb
> >> >> >
> >> >> > LogFile %L/logfile.%Y.%m.%d
> >> >> >
> >> >> > DictionaryFile %D/dictionary
> >> >> >
> >> >> > SnmpgetProg /usr/bin/snmpget
> >> >> >
> >> >> > <Client X.X.X.X>
> >> >> > Secret ****
> >> >> > IgnoreAcctSignature
> >> >> > </Client>
> >> >> >
> >> >> >
> >> >> > <Realm DEFAULT>
> >> >> > AcctLogFileName %L/detail.%Y.%m.%d
> >> >> >
> >> >> > RejectHasReason
> >> >> >
> >> >> > <AuthBy FILE>
> >> >> > Identifier Check-FILE
> >> >> > Filename %D/users
> >> >> > DefaultSimultaneousUse 1
> >> >> > </AuthBy>
> >> >> >
> >> >> > <AuthBy UNIX>
> >> >> > Identifier Check-UNIX
> >> >> > Filename /etc/shadow
> >> >> > DefaultSimultaneousUse 1
> >> >> > </AuthBy>
> >> >> >
> >> >> > </Realm>
> >> >> >
> >> >> >
> >> >> > 'Tunde Ogedengbe
> >> >> >
> >> >> >
> >> >> >
> >> >> > -------- ORIGINAL MESSAGE BELOW --------
> >> >> >
> >> >> > Hello Camilo, Hello 'Tunde -
> >> >> >
> >> >> > In general, problems with simultaneous use are usually due to
> >dropped
> >> > > > accounting packets (sometimes congested links, sometimes NAS
bugs,
> >> >> > sometimes
> >> >> > configuration problems with Radiator).
> >> >> >
> >> >> > I am happy to assist with any problems, but I need to see what
is
> >> >> > going on.
> >> >> >
> >> >> > Please send me a copy of the configuration file (no secrets)
> >together
> >> >> > with a
> >> >> > trace 4 debug from Radiator showing the problem.
> >> >> >
> >> >> > It would also be helpful if you could provide some description
of
> >> >> > what you
> >> >> > are trying to accomplish.
> >> >> >
> >> >> > thanks
> >> >> >
> >> >> > Hugh
> >> >> >
> >> >> > On Thursday 30 August 2001 01:04, Camilo Fernando Corena G.
wrote:
> >> >> > > I have the same problem.
> >> >> > >
> >> >> > > Someone can help us???
> >> >> > >
> >> >> > > 'Tunde Ogedengbe wrote:
> >> >> > > > Hello:
> >> >> > > >
> >> >> > > > We are having problems with this attribute. In some of our
> >> >> > > > installations, the attribute does not work at all and so no
> >> >restriction
> >> >> > > > is enforced. On another installation, it works but with
severe
> >> >> > > > problems. For instance customers with an attribute of 1 who
> >> >previously
> >> >> > > > connected to our system and later disconnected are having
> >problems
> >> >> > > > reconnecting. This has resulted in a serious problem in
which a
> >> >> > > > significant percentage of connection problems were related
to
> >the
> >> >> > > > SimultaneousUse attribute. What we have done in the interim
is
> >to
> >> >set
> >> >> > > > the attribute to 3. How can we resolve this problem?
> >> >> > > >
> >> >> > > > 'Tunde Ogedengbe
> >> >> > > > Linkserve Limited
> >> >> > > > 22 Akin Adesola Street
> >> >> > > > Victoria Island
> >> >> > > > Lagos - Nigeria
> >> >> > > > Tel: +234 1 2623900
> >> >> > > > Fax: +234 1 2623906
> >> >> > > > URL: http://www.linkserve.net
> >> >> > > > ----- Original Message -----
> >> >> > > > From: "Hugh Irvine" <[EMAIL PROTECTED]>
> >> >> > > > To: "lloyd" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
> >> >> > > > Cc: <[EMAIL PROTECTED]>
> >> >> > > > Sent: Wednesday, August 29, 2001 8:48 AM
> >> >> > > > Subject: (RADIATOR) Re: two authby clauses
> >> >> > > >
> >> >> > > > > Hello Lloyd -
> >> >> > > > >
> >> >> > > > > What exactly are you trying to do?
> >> >> > > > >
> >> >> > > > > thanks
> >> >> > > > >
> >> >> > > > > Hugh
> >> >> > > > >
> >> >> > > > > On Wednesday 29 August 2001 14:28, lloyd wrote:
> >> >> > > > > > hi,
> >> >> > > > > > how do i configure radiator in such a way that before it
> >proxy's
> >> >to
> >> >> > > > > > another radius server, it checks for the
Called-Station-Id
> >in
> >> >say a
> >> >> > > > > > flat file or a database?
> >> >> > > > > >
> >> >> > > > > >
> >> >> > > > > > will this work (file based with only one field:
> > > >> > > > > > telephonenumbers).....
> >> >> > > > > >
> >> >> > > > > > <AuthBy FILE>
> >> >> > > > > > Identifier calledstationid
> >> >> > > > > > FileName %d/Called-Station-ID
> >> >> > > > > > </AuthBy>
> >> >> > > > > >
> >> >> > > > > > <AuthBy RADIUS>
> >> >> > > > > > Identifier radiusproxy>
> >> >> > > > > > Host ***.***.***.***
> >> >> > > > > > Secret ******
> >> >> > > > > > AuthPort ****
> >> >> > > > > > AcctPort ****
> >> >> > > > > > </AuthBy>
> >> >> > > > > >
> >> >> > > > > > <Realm>
> >> >> > > > > > AuthByPolicy ContinueAlways
> >> >> > > > > > AuthBy calledstationid
> >> >> > > > > > AuthBy radiusproxy
> >> >> > > > > > </Realm>
> >> >> > > > > >
> >> >> > > > > >
> >> >> > > > > > Lloyd Dagoc
> >> >> > > > > > InterDotNet Philippines Inc.
> >> >> > > > >
> >> >> > > > > --
> >> >> > > > > Radiator: the most portable, flexible and configurable
RADIUS
> >> >server
> >> >> > > > > anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT,
> >MacOS
> >> >X.
> >> >> > > > > -
> >> >> > > > > Nets: internetwork inventory and management - graphical,
> >> >extensible,
> >> >> > > > > flexible with hardware, software, platform and database
> >> >independence.
> >> >> > > > > ===
> >> >> > > > > Archive at http://www.open.com.au/archives/radiator/
> >> >> > > > > Announcements on [EMAIL PROTECTED]
> >> >> > > > > To unsubscribe, email '[EMAIL PROTECTED]' with
> >> >> > > > > 'unsubscribe radiator' in the body of the message.
> >> >> > > >
> >> >> > > > ===
> >> >> > > > Archive at http://www.open.com.au/archives/radiator/
> >> >> > > > Announcements on [EMAIL PROTECTED]
> >> >> > > > To unsubscribe, email '[EMAIL PROTECTED]' with
> >> >> > > > 'unsubscribe radiator' in the body of the message.
> >> >>
> >> >> --
> >> >> Radiator: the most portable, flexible and configurable RADIUS
server
> >> >> anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS
X.
> >> >> -
> >> >> Nets: internetwork inventory and management - graphical,
extensible,
> >> > > flexible with hardware, software, platform and database
independence.
> >> >> ===
> >> >> Archive at http://www.open.com.au/archives/radiator/
> >> >> Announcements on [EMAIL PROTECTED]
> >> >> To unsubscribe, email '[EMAIL PROTECTED]' with
> >> >> 'unsubscribe radiator' in the body of the message.
> >> >>
> >>
> >> --
> >>
> >> NB: I am travelling this week, so there may be delays in our
> >correspondence.
> >>
> >> Radiator: the most portable, flexible and configurable RADIUS server
> >> anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
> >> Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
> >> Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
> >>
>
> --
>
> NB: I am travelling this week, so there may be delays in our
correspondence.
>
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
> Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
> Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
>
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
