Hi all,
Below is the content of my radius.cfg but the Radiator is not
authenticating the clients rather the authentication is being done by the
Cisco Access server.
<Client IP add. of the
NAS>
Secret
...
</Client>
#<Client
DEFAULT>
# Secret mysecret
# DupInterval
0
#</Client>
<Realm domain name> <AuthBy
FILE> Filename
%D/users </AuthBy> # Log accounting to a detail
file AcctLogFileName %L/detail MaximumSessions
1 </Realm> AuthPort 1645
AcctPort 1646
Is the configuration enough to make the Radiator authenticate clients
or I still need to modify it? And if I need to modify it, what do I do
pls?
Below is the configuration on the NAS (Cisco AS5300):
aaa new-model
aaa authentication login default local
aaa
authentication ppp ppp-radius if-needed radius local
aaa authorization
network default radius local
aaa accounting network default start-stop
radius
radius-server host (IP Address) auth-port 1645 acct-port
1646
radius-server key ...
(2) The time in the logfile does not correspond to the time on the
Radius server and the NAS, what could be responsible this pls? Although,
the date is correct.
Any help will be highly appreciated.
Regards,
Akin.
|
