Hi All, Hi Hugh,
Okay, I am back with my encryption questions
:-)
From the accouting request below, I noticed
that MS-MPPE-Encryption-Types is set to 0
Anybody know how to set the value
of MS-MPPE-Encryption-Types to 1 or 2 on a Windows
2000 server. On the windows 2000 client, it goes as
far as "registering your computer on remote
network" then it immediately comes up with "the
remote comuter does not support the required
encryption type" - when I configure the VPN client
to require encryption.
I noticed that Radiator actually send an
access-accept packet to the windows RAS and also
that the windows RAS immediately send another
accounting request packet back to radiator
stating that the user was disconnected at "user's
request". Any ideas?
Acct-Output-Packets = 13
Acct-Input-Packets = 12 Acct-Terminate-Cause = User-Request The original access-request is below:
Sat May 18 08:51:04 2002: DEBUG: Packet
dump:
*** Received from 80.247.140.4 port 1109 .... Code: Accounting-Request Identifier: 3 Authentic: <219><145><210><146><203><226>\<12><185>;<248><171>tEO<230> Attributes: Acct-Status-Type = Start Acct-Delay-Time = 0 NAS-IP-Address = 80.247.140.4 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 5 MS-RAS-Vendor = 311 MS-RAS-Version = "MSRASV5.00" NAS-Port-Type = Virtual Tunnel-Type = 0:PPTP Tunnel-Medium-Type = 0:IP Calling-Station-Id = "172.31.1.18" Tunnel-Client-Endpoint = 49:72.31.1.18 Acct-Session-Id = "133" User-Name = "kdavid"
Framed-IP-Address = 80.247.156.36
Framed-MTU = 1500 Session-Timeout = 54596 Acct-Multi-Session-Id = "3" Acct-Link-Count = 1 Event-Timestamp = 1027622370 Acct-Authentic = RADIUS MS-MPPE-Encryption-Types = 0 |
- Re: (RADIATOR) Windows 2000, Radiator and Encryption Ayotunde Itayemi