Hi, You didn't say anything about the other parts of your config - special entries in your client clauses, special client clause for ipass, username character set definition, format you receive ipass client username requests etc.
Regards, Tunde I. ----- Original Message ----- From: "Mike Blancas" <[EMAIL PROTECTED]> To: "Ayotunde Itayemi" <[EMAIL PROTECTED]> Cc: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, October 01, 2002 2:29 AM Subject: Re: (RADIATOR) radiator and ipass > Our setup is to proxy all iPass request to our iPass netserver using the > AuthBy RADIUS and Realm DEFAULT. My local accounts are handled by > different Realm and AuthBy clauses. This setup has been working for more > than 1 yr without any problems. In the bottom of my radius.cfg, I have the > following lines: > > <Realm DEFAULT> > <AuthBy RADIUS> > Host ipass.netserver.ip > Secret xxxxxxxx > AuthPort 11812 > AcctPort 11813 > </AuthBy> > </Realm> > > Mike Blancas <[EMAIL PROTECTED]> > Mosaic Communications, Inc. > > On Mon, 30 Sep 2002, Ayotunde Itayemi wrote: > > > Hi All, > > > > Is there anybody on the list running ipass netserver and radiator? > > I am having problems with my config. I have installed both software but in order to get it to > > work properly, ipass specifies that the following lines should be added to all client clauses > > in the radiator config file: > > > > RewriteUsername s/^IPASS\/([^@]+)\@([^@]+)$/IPASS\/$1#$2\@myipass/ > > > > > > After having added the line above, I (assume) then need to add the character / to the UsernameCharset > > set in radiator so as to allow names of the form IPASS/username ? > > > > Default of ( a-zA-Z0-9\._@- ). I have tried ( UsernameCharset a-zA-Z0-9\._@-/) and ( UsernameCharset a-zA-Z0-9\._@-\/ ) > > > > But I noticed that when I do so, a request with the name of the form IPASS/username kills radiator. > > It just stops and even there is nothing in the log with a trace 4 option. > > > > Please I would liek someone to provide me with a working config and if possible a brief explanation > > of any area that is not too clear or standard. > > > > Regards, > > Tunde I. > > > > > > === > Archive at http://www.open.com.au/archives/radiator/ > Announcements on [EMAIL PROTECTED] > To unsubscribe, email '[EMAIL PROTECTED]' with > 'unsubscribe radiator' in the body of the message. > === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.