Hi Eapen, hi All, This is no longer radiator but ... By the way, I couldnt install the DBD-Oracle perl module - it seems anything short of a full Oracle DB install wont work - I installed only the runtime client so now I have to reinstall the whole thing again. Now whenever I start the Oracle installer, it crashes out with a JVM error! Why me! :-(
Eapen, what sort of SUN do you have? I also have a Netra X1 here with me that the owner has lost its LOMlite password. I got some info from tech-tips about resetting a jumper on the board (J13) but that was for a larger SUN machine so I couldnt find the jumper on the board. I noticed though that there is a jumper right next to the flash card on the SUN ... :-) Any ideas? Regards, Tunde I. ----- Original Message ----- From: "Eapen Joseph" <[EMAIL PROTECTED]> To: "Ayotunde Itayemi" <[EMAIL PROTECTED]> Cc: "Elias" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, August 06, 2003 5:41 AM Subject: Re: (RADIATOR) radiator on solaris SPARC > hi, > i have radiator working fine without any problem on sun. The compiler > i've used is workshop6. All the perl modules installation also went > fine. > > rgds > eapen > > ----- Original Message ----- > From: "Ayotunde Itayemi" <[EMAIL PROTECTED]> > Date: Tuesday, August 5, 2003 2:06 pm > Subject: Re: (RADIATOR) radiator on solaris SPARC > > > Hi Elias, hi Richard, > > > > You are both right! To think I spent the whole of yesterday on this! > > I have started installing the perl modules in less than 30minutes! > > > > Ok. I uninstalled perl 5.005 which came with Solaris and installed the > > GNU perl 5.6.1 instead ( I had done that before reading Richard's > > reply)I guess I could have kept both. > > > > I also installed the GNC gcc 3.3 and libgcc 3.3 > > > > soft-linked /usr/ucb/cc to /usr/local/bin/gcc > > > > and I am compiling away! > > > > Thanks, it goes to show that "Knowledge is indeed power!" > > > > Tunde Itayemi. > > > > ----- Original Message ----- > > From: Elias > > To: Ayotunde Itayemi > > Sent: Tuesday, August 05, 2003 11:00 AM > > Subject: Re: (RADIATOR) radiator on solaris SPARC > > > > > > *********************** > > Your mail has been scanned by TMnet VirusWall. > > *********************** > > > > > > > > Hi, > > > > I'm running my Radiator setup on Solaris 8 with an Oracle DB. I > > think your problem is more with Perl. The default Perl > > installation that comes with Solaris is linked to use cc. I > > normally reinstall Perl to get it to run with gcc. > > ----- Original Message ----- > > From: Ayotunde Itayemi > > To: [EMAIL PROTECTED] > > Cc: Hugh Irvine > > Sent: Tuesday, August 05, 2003 5:31 PM > > Subject: (RADIATOR) radiator on solaris SPARC > > > > > > *********************** > > This e-mail was scanned by TM Net E-Mail Virus Shield. > > *********************** > > > > > > > > > > Hi All, > > > > I have a Netra X1 (Solaris 8 SPARC) (and also a Sun SureFire > > v100) and I have tried without > > sucess to install radiator on them. > > I can't install most perl modules either, and yes I have seen > > all the mails on the net about > > installing GNU gcc and pointing the cc (wrapper) for the > > inexistent SUN compiler to gcc. > > > > perl Makefile.PL works everytime but make always bombs with > > something similar to > > (see below). I have tried both the solaris make and the GNU > > make (v 3.80) > > > > someone suggested gcc 2.95.2 which is supposed to be > > compatible with most OS, > > I have also tried 3.2.2 and 3.3. > > > > Has anyone installed radiator on solaris 8 sparc? and used it > > with a database? > > I was able to install the Oracle 9i client by the way on the s. > > perl version is 5.005_03 > > > > Thanks. > > Regards, > > Tunde I. > > > > ================================================= > > cp Changes blib/lib/DBI/Changes.pm > > cc -c -xO3 -xdepend -DVERSION=\"1.21\" - > > DXS_VERSION=\"1.21\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE - > > DDBI_NO_THREADS Perl.c > > cc: unrecognized option `-KPIC' > > cc: language depend not recognized > > cc: Perl.c: linker input file unused since linking not done > > /usr/bin/perl -I/usr/perl5/5.00503/sun4-solaris - > > I/usr/perl5/5.00503 /usr/perl5/5.00503/ExtUtils/xsubpp -typemap > > /usr/perl5/5.00503/ExtUtils/typemap DBI.xs >xstmp.c && mv xstmp.c > > DBI.c cc -c -xO3 -xdepend -DVERSION=\"1.21\" - > > DXS_VERSION=\"1.21\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE - > > DDBI_NO_THREADS DBI.c > > cc: unrecognized option `-KPIC' > > cc: language depend not recognized > > cc: DBI.c: linker input file unused since linking not done > > Running Mkbootstrap for DBI () > > chmod 644 DBI.bs > > LD_RUN_PATH="" cc -o bli cc: DBI.o: No such file or directory > > cc: No input files > > make: *** [bli bash-2.03# > > > > > > === > Archive at http://www.open.com.au/archives/radiator/ > Announcements on [EMAIL PROTECTED] > To unsubscribe, email '[EMAIL PROTECTED]' with > 'unsubscribe radiator' in the body of the message. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.