I've allready tried 'make && make install' , the I get the following error: Makefile:84: *** missing separator. Stop.
My destro: Redhat 9.0 Met vriendelijke groet, Bobbejaan van Elst Planet Technologies -----Original Message----- From: Matthew Trout [mailto:[EMAIL PROTECTED] Sent: donderdag 4 september 2003 15:58 To: 'Bobbejaan van Elst' Subject: RE: (RADIATOR) Installing Digest-MD5 Depends which distro you're using, I'd suspect The homepage is http://www.gnu.org/software/gdbm/gdbm.html and there seem to be a fair number of rpms available - http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=gdbm+rpm&btnG =Goo gle+Search However, since it's only needed for testing, if you just do 'make && make install' Digest::MD5 should go onto your system quite happily anyway. > -----Original Message----- > From: Bobbejaan van Elst [mailto:[EMAIL PROTECTED] > Sent: 04 September 2003 14:51 > To: 'Matthew Trout' > Subject: RE: (RADIATOR) Installing Digest-MD5 > > > Dou you have an idea how I can solve this? > > > -----Original Message----- > From: Matthew Trout [mailto:[EMAIL PROTECTED] > Sent: donderdag 4 september 2003 15:48 > To: 'Bobbejaan van Elst'; [EMAIL PROTECTED] > Subject: RE: (RADIATOR) Installing Digest-MD5 > > > You're short libgdbm, the library for the GNU database system (their > take on the BSD .db and SysV .dir/.pag stuff) > > This is (presumably) used for the test scripts for Digest::MD5 > > > -----Original Message----- > > From: Bobbejaan van Elst [mailto:[EMAIL PROTECTED] > > Sent: 04 September 2003 14:15 > > To: [EMAIL PROTECTED] > > Subject: (RADIATOR) Installing Digest-MD5 > > > > > > Hi, > > > > I get this error when I start radiator: > > > > $ ./radiator start > > Starting Radiator: Can't locate object method "initialize" > via package > > > "Radius::SqlDb" at > > > /usr/lib/perl5/site_perl/5.8.0/Radius/AddressAllocatorSQL.pm line 65, > > <FILE> line 186. > > [FAILED] > > > > So I try to install Digest-MD5-2.27 > > > > Then I get this error: > > > > $ perl Makefile.PL > > Testing alignment requirements for U32... /usr/bin/ld: cannot find > > -lgdbm > > collect2: ld returned 1 exit status > > Can't compile test program. Will ensure alignment to play safe. > > > > Checking if your kit is complete... > > Looks good > > Writing Makefile for Digest::MD5 > > > > > > My perl config: > > > > $ perl -V > > Summary of my perl5 (revision 5.0 version 8 subversion 0) > > configuration: > > Platform: > > osname=linux, osvers=2.4.20-2.48smp, > > archname=i386-linux-thread-multi > > uname='linux str' > > config_args='-des -Doptimize=-O2 -march=i386 -mcpu=i686 -g > > -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc > -Dcf_by=Red > > Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux > > -Dvendorprefix=/usr -Dsiteprefix=/usr > > -Dotherlibdirs=/usr/lib/perl5/5.8.0 -Duseshrplib -Dusethreads > > -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db > > -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio > > -Dinstallusrbinperl -Ubincompat5005 -Uversiononly > > -Dpager=/usr/bin/less -isr' > > hint=recommended, useposix=true, d_sigaction=define > > usethreads=define use5005threads=undef' > > useithreads=define usemultiplicity= > > useperlio= d_sfio=undef uselargefiles=define usesocks=undef > > use64bitint=undef use64bitall=un uselongdouble= > > usemymalloc=, bincompat5005=undef > > Compiler: > > cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE > -DTHREADS_HAVE_PIDS > > -DDEBUGGING -fno-strict-aliasing -I/usr/local/include > > -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', > > optimize='', > > cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS > > -DDEBUGGING > > -fno-strict-aliasing -I/usr/local/include -I/usr/include/gdbm' > > ccversion='', gccversion='3.2.2 20030213 (Red Hat Linux 8.0 > > 3.2.2-1)', gccosandvers='' > > gccversion='3.2.2 200302' > > intsize=e, longsize= , ptrsize=p, doublesize=8, byteorder=1234 > > d_longlong=define, longlongsize=8, d_longdbl=define, > > longdblsize=12 > > ivtype='long' > > k', ivsize=4' > > ivtype='long' > > known_ext, nvtype='double' > > o_nonbl', nvsize=, Off_t='', lseeksize=8 > > alignbytes=4, prototype=define > > Linker and Libraries: > > ld='gcc' > > l', ldflags =' -L/usr/local/lib' > > ldf' > > libpth=/usr/local/lib /lib /usr/lib > > libs=-lnsl -lgdbm -ldb -ldl -lm -lpthread -lc -lcrypt -lutil > > perllibs= > > libc=/lib/libc-2.3.1.so, so=so, useshrplib=true, libperl=libper > > gnulibc_version='2.3.1' > > Dynamic Linking: > > dlsrc=dl_dlopen.xs, dlext=so', d_dlsymun=undef, > > ccdlflags='-rdynamic > > -Wl,-rpath,/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE' > > cccdlflags='-fPIC' > > ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5', lddlflags='s > > Unicode/Normalize XS/A' > > > > > > Characteristics of this binary (from libperl): > > Compile-time options: DEBUGGING MULTIPLICITY USE_ITHREADS > > USE_LARGE_FILES PERL_IMPLICIT_CONTEXT > > Locally applied patches: > > MAINT18379 > > Built under linux > > Compiled at Feb 18 2003 22:19:53 > > @INC: > > /usr/lib/perl5/5.8.0/i386-linux-thread-multi > > /usr/lib/perl5/5.8.0 > > /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi > > /usr/lib/perl5/site_perl/5.8.0 > > /usr/lib/perl5/site_perl > > /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi > > /usr/lib/perl5/vendor_perl/5.8.0 > > /usr/lib/perl5/vendor_perl > > /usr/lib/perl5/5.8.0/i386-linux-thread-multi > > /usr/lib/perl5/5.8.0 > > . > > > > > > Has someone an idea? > > > > Greetz, > > > > Bobbejaan van Elst > > > > === > > Archive at http://www.open.com.au/archives/radiator/ > > Announcements on [EMAIL PROTECTED] > > To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe > > radiator' in the body of the message. > > > === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.