Hi Guys, Our current setup is - We have multiple DSL realms all configured on our radmin/radiator server and approx 15 vpdn-groups on our LNS that connect to the carriers LACs.
We are adding a new dsl realm, connection requests for the new realm will be coming from the same LAC's, but we want to not auth the new realm via our existing radius server - We want our LNS to create an L2TP tunnel to another LNS for this new realm (And then this other LNS will authenticate the DSL tails via another radius server). I believe this can be accomplished from radius...eg: testrealm.com.au Password = "cisco" Service-Type = Outbound, Cisco-avpair = "vpdn:tunnel-type=l2tp", Cisco-avpair = "vpdn:tunnel-id=TEST7200", Cisco-avpair = "vpdn:ip-addresses=x.x.x.x", Cisco-avpair = "vpdn:source-ip=y.y.y.y", Cisco-avpair = "vpdn:l2tp-tunnel-password=xxx" But hoping someone can provide guidance as to how this can be done within Radmin...i.e. in radmin.cfg? Our existing realms are configured like so (radmin.cfg): <Realm realm1.com> AuthByPolicy ContinueWhileAccept <AuthBy RADMIN> DB stuff (login credentials etc) .. AccountingTable RADUSAGE AcctColumnDef USERNAME,User-Name (heap of other AcctColumnDef) .. AddToReply Framed-Protocol = PPP,\ Framed-IP-Netmask = 255.255.255.255,\ Framed-Routing = None,\ Framed-MTU = 1500,\ Framed-Compression = Van-Jacobson-TCP-IP,\ #Fall-Through = Yes,\ Service-Type = "Framed-User", </AuthBy> Logging stuff.. </Realm> So not 100% on how this new realm would be added to radmin.cfg? Thanks in advance.
_______________________________________________ radiator mailing list radiator@open.com.au http://www.open.com.au/mailman/listinfo/radiator