Mule, Thanks for being so patient! This is definitely not the experience we want to give our customers. We *will* resolve this problem, or exchange your unit, (or refund -- but you don't want to do that ;-).
So, the smoking gun is this: Jan 1 01:00:49 kernel: [ 49.507417] i2c-adapter i2c-1: ACK not received That means something has gone awry with the microcontroller -- it could be a hardware or software problem. Shortly before release one of our developers found a problem with interference in one room in his house, that exposed a bug in the microcontroller IR receiver code. We fixed this problem, but perhaps there is another one. The interference could be coming from a fluorescent bulb, or some other light or RF source in the 40kHz range. If you would like to give it a try, I can make you a special microcontroller firmware load to help resolve this issue. If you are game, please give this a try: ssh -lroot <ip-address> # cd /sys/bus/i2c/devices/1-0010 # echo erase > flash # echo program > flash During the program stage, it will hang for about 5 seconds, but then everything will come back to life, and your knobs should work again. I'm sorry you're having problems. We really appreciate your patience with this. If you would like to give a try with new microcontroller firmware, let me know, and I'll PM you with microcontroller update instructions. (it's no more difficult than the instructions above for reprogramming the microcontroller). Sincerely, -Caleb -- ccrome2 Caleb Crome Sr. Hardware Engineer Logitech SMBU (i.e. the Squeezebox people) <B>The future is here. It's just not widely distributed yet.</B> <I>-William Gibson</I> ------------------------------------------------------------------------ ccrome2's Profile: http://forums.slimdevices.com/member.php?userid=18023 View this thread: http://forums.slimdevices.com/showthread.php?t=69418 _______________________________________________ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
