what model of nexus is this? On Thu, 2019-06-27 at 00:07 -0400, FF wrote: > ok, > > So upgraded to 3.9 with the same behavior. > > Built a cisco-nxp personality that had an | exclude OK line on it to > remove the wattage line... but suddenly rancid couldn't log in to > those units. > Even though clogin would work fine. Went and modified the cisco-nx > definition... but the exclude is ignored. > > So now 2.3 and 3.9 behave identically in this situation... > > This is the whole output for the section in question: > > > > > > > > > > > > > > > > > > > > > > Index: configs/10.10.10.114 > > =================================================================== > > retrieving revision 1.1157 > > diff -u -4 -r1.1157 10.10.10.114 > > @@ -80,10 +80,10 @@ > > !Env: Power Actual Total > > !Env: Supply Model Input > Capacity Status > > !Env: (Watts > ) (Watts ) > > !Env: > ------- ---------- --------------- ------ > ---------- -------------------- > > - !Env: 1 > N9K-PAC-1200W-B > 192 W 1200 W Ok > > - !Env: 2 > N9K-PAC-1200W-B > 174 W 1200 W Ok > > + !Env: 1 > N9K-PAC-1200W-B > 190 W 1200 W Ok > > + !Env: 2 > N9K-PAC-1200W-B > 176 W 1200 W Ok > > !Env: Power Usage > Summary: > > !Env: > -------------------- > > !Env: Power > Supply redundancy mode (configured) PS-Redundant > > !Env: Power > Supply redundancy mode (operational) PS-Redundant > > > > > > > > Any suggestions? > > Thanks in advance! > > > > > On Mon, Mar 11, 2019 at 5:02 PM FF <fusionf...@gmail.com> wrote: > > Apparently I'm running a massively old version (2.3.8). I'll try > > upgrading to 3.9 first. > > > > thanks in advance > > > > On Mon, Mar 11, 2019 at 4:47 PM heasley <h...@shrubbery.net> wrote: > > > Fri, Mar 08, 2019 at 07:06:45PM +0000, Nick Nauwelaerts: > > > > > > > what version of rancid & nx-os are you running? > > > > > > > > > > > > good question. > > > > > > > > > > > > if the answer is 3.9, please show us the complete output of show > > > environment power > > > > > > > > > > > > > i notice you only have 1 column less as me, you seem to miss > > > "actual output". > > > > > > > > > > > > > > > > > > > > > // nick > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > From: Rancid-discuss [mailto: > > > rancid-discuss-boun...@shrubbery.net] On Behalf Of FF > > > > > > > Sent: Friday, March 8, 2019 18:05 > > > > > > > To: rancid-discuss@shrubbery.net > > > > > > > Subject: [SPAM?] [rancid] Cisco NX "chatty" with Power info > > > > > > > > > > > > > > > > > > > > > !Env: Power Actual Total > > > > > > > > > > > > > > !Env: Supply Model Input Capacity > > > Status > > > > > > > > > > > > > > !Env: (Watts ) (Watts > > > ) > > > > > > > > > > > > > > !Env: ------- ---------- --------------- ------ ------- > > > --- -------------------- > > > > > > > > > > > > > > - !Env: 1 N9K-PAC-1200W-B 180 W > > > 1200 W Ok > > > > > > > > > > > > > > + !Env: 1 N9K-PAC-1200W-B 182 W > > > 1200 W Ok > > > > > > > > > > > > > > !Env: 2 N9K-PAC-1200W-B 162 W > > > 1200 W Ok > > > > > > > > > > > > > > !Env: Power Usage Summary: > > > > > > > > > > > > > > Every time Rancid runs, we get erroneous reports because the > > > power usage fluctuates by 1-2 watts per run. Any suggestions on > > > how to keep the good information (availability, etc) without > > > getting this level of detail? > > > > > > > > > > > > > > thanks in advance! > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > FF > > > > > > > > > > > > > > ________________________________ > > > > > > > > > > > > > > Volg Aquafin op Facebook<https://www.facebook.com/AquafinNV> | > > > Twitter<https://twitter.com/aquafinnv> | YouTube< > > > http://www.youtube.com/channel/UCk_4P5BJ-MtEEDCkCsR_KqQ?feature=mhee > > > > | LinkedIN<http://www.linkedin.com/company/aquafin/products> | > > > Instagram<https://www.instagram.com/aquafin_nv/> > > > > > > > > > > > > > > In het kader van de uitoefening van onze taken verzamelen we > > > bij Aquafin persoonsgegevens. Hoe we omgaan met deze gegevens en > > > wat de rechten van de betrokkenen zijn, kan je nalezen in onze > > > privacy policy<https://www.aquafin.be/nl-be/privacy-policy>;. > > > > > > > > > > > > > > P Denk aan het milieu. Druk deze mail niet onnodig af. > > > > > > > > > > > > > _______________________________________________ > > > > > > > Rancid-discuss mailing list > > > > > > > Rancid-discuss@shrubbery.net > > > > > > > http://www.shrubbery.net/mailman/listinfo/rancid-discuss > > > > > > > > > > > > > -- > > FF > > > _______________________________________________Rancid-discuss mailing > listrancid-disc...@shrubbery.net > http://www.shrubbery.net/mailman/listinfo/rancid-discuss
_______________________________________________ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
