Sun, Oct 13, 2019 at 09:53:21AM +0000, Piegorsch, Weylin William:
> Should an autonomous Aeronet AP have its config in rancid through wlc8? I'd
> had success (years ago, on older version of rancid and AeroOS) with type
> cisco. If this is a Aeronet AP on a WLC, then wouldn’t simply backing up the
> WLC be sufficient?
> weylin
I can not answer that, but I am curious to see the diff that was produced
prior to this change. Is it possible that it was terminal control characters
causing the changes?
> On 10/8/19, 7:51 AM, "Bjarne Saltbæk" <bjarne.saltb...@sinch.com> wrote:
>
> Hi again.
>
> I just realized that a patch in ciscowlc.pm would make more sense:
>
> --- cut ---
> --- /usr/share/perl5/vendor_perl/rancid/ciscowlc.pm.org 2019-10-08
> 13:30:29.894650701 +0200
> +++ /usr/share/perl5/vendor_perl/rancid/ciscowlc.pm 2019-10-08
> 13:48:38.125686723 +0200
> @@ -137,6 +137,9 @@
> next if (/^\s*rogue ap classify/);
> next if (/^\s*rogue (adhoc|client) (alert|unknown)/i);
> next if (/^\s*interface nat-address management set
> -?[0-9]{4,}\./);
> + next if (/^\s*Config generation may take some time .../);
> + next if (/^\s*# WLC Config Begin/);
> + next if (/^\s*# WLC Config End/);
>
> $linecnt++;
>
> --- cut ---
>
>
> --
> Bjarne Saltbæk
> System Administrator
> Sinch Denmark
>
> > -----Original Message-----
> > From: Bjarne Saltbæk
> > Sent: Tuesday, 8 October 2019 13.12
> > To: rancid-discuss@shrubbery.net
> > Subject: patch suggestion for Cisco Mobile Express
> >
> > Hi
> >
> > I am using the 3.9 version for backing up Cisco Mobility Express config
> on a
> > Cisco Aironet 1830.
> >
> > I was getting random garbage in the config by using
> >
> > /etc/rancid/rancid.types.base
> > cisco-wlc8;script;rancid -t cisco-wlc8
> > cisco-wlc8;login;wlogin
> > cisco-wlc8;timeout;120
> > cisco-wlc8;module;ciscowlc
> > cisco-wlc8;inloop;ciscowlc::inloop
> > cisco-wlc8;command;ciscowlc::ShowUdi;show udi cisco-
> > wlc8;command;ciscowlc::ShowSysinfo;show sysinfo cisco-
> > wlc8;command;ciscowlc::ShowConfig;show run-config commands
> >
> > changed ShowConfig from run-config commands to
> >
> > cisco-wlc8;command;ciscowlc::ShowConfig;show run-config startup-
> > commands
> >
> > But then ended up with new dates on every diff.
> > Fixed it by patching wlogin
> > --- cut ---
> > --- wlogin.bak 2019-10-08 12:14:31.085325057 +0200
> > +++ wlogin 2019-10-08 12:58:13.325178327 +0200
> > @@ -684,6 +684,8 @@
> > for {set i 0} {$i < $num_commands} { incr i} {
> > send -- "[subst -nocommands [lindex $commands $i]]\r"
> > expect {
> > + -re "^# WLC Config Begin.*\r\n" { exp_continue }
> > + -re "^# WLC Config End.*\r\n" { exp_continue }
> > -re "\b+" { exp_continue }
> > -re "^\[^\n\r *]*$reprompt" { send_user --
> "$expect_out(buffer)"
> > }
> > --- cut ---
> >
> > Feel free to add this to the upstream code.
> >
> > BR,
> > Bjarne
> >
> >
> >
> > --
> > Bjarne Saltbæk
> > System Administrator
> > Sinch Denmark
>
>
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss@shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
_______________________________________________
Rancid-discuss mailing list
Rancid-discuss@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-discuss
