Hi,
I would like to know if some of you succeeded in backing UP HPE switches. I successfully backed up HP FF 7910, HP 2530, but no way to back up HPE 5130 and HP 5120. If I type this command: *[rancid@cardlswbkp1 bin]$ ./cmwlogin -c "display version" 10.1.170.1* *10.1.170.1* *spawn telnet 10.1.170.1* *Trying 10.1.170.1...* *Connected to 10.1.170.1.* *Escape character is '^]'.* ******************************************************************************** ** Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP ** ** Without the owner's prior written consent, ** ** no decompiling or reverse-engineering shall be allowed. ** ******************************************************************************** *login: [login]* *Password:* *<MGMSW1>undo smart* * ^* *% Unrecognized command found at '^' position.* *<MGMSW1>undo interactive* * ^* *% Unrecognized command found at '^' position.* *<MGMSW1>undo terminal monitor* *The current terminal is disabled to display logs.* *<MGMSW1>* *<MGMSW1>terminal length 0* * ^* *% Unrecognized command found at '^' position.* *<MGMSW1>terminal width 132* * ^* *% Unrecognized command found at '^' position.* *<MGMSW1>display version* *HPE Comware Software, Version 7.1.070, Release 3208P03* *Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP* *HPE 5130 24G PoE+ 4SFP+ EI Switch uptime is 10 weeks, 4 days, 6 hours, 28 minutes* *Last reboot reason : Cold reboot* *####suppressed output###* *Boot image: flash:/5130ei-cmw710-boot-r3208p03.bin* *Boot image version: 7.1.070, Release 3208P03* * Compiled Dec 14 2017 18:00:00* *System image: flash:/5130ei-cmw710-system-r3208p03.bin* *System image version: 7.1.070, Release 3208P03* * Compiled Dec 14 2017 18:00:00* *<MGMSW1>exit* *Connection closed by foreign host.* *[rancid@cardlswbkp1 bin]$* It work. But I launch rancid-run, I never receive the output. When I type: ./cmwlogin -dl 10.1.170.1, the output is stocked here: *expect: does "" (spawn_id exp6) match regular expression "[\r\n]+"? (No Gate, RE only) gate=yes re=no* *"^(.+[:.])1 ((>\u0007?|#| \(enable\)))"? (No Gate, RE only) gate=yes re=no* *"^.+(>\u0007?|#| \(enable\))"? (No Gate, RE only) gate=yes re=no* *<MGMSW1>* *expect: does "<MGMSW1>" (spawn_id exp6) match regular expression "[\r\n]+"? (No Gate, RE only) gate=yes re=no* *"^(.+[:.])1 ((>\u0007?|#| \(enable\)))"? (No Gate, RE only) gate=yes re=no* *"^.+(>\u0007?|#| \(enable\))"? (No Gate, RE only) gate=yes re=yes* *expect: set expect_out(0,string) "<MGMSW1>"* *expect: set expect_out(1,string) ">"* *expect: set expect_out(spawn_id) "exp6"* *expect: set expect_out(buffer) "<MGMSW1>"* *tty_raw_noecho: was raw = 0 echo = 1* Anybody can help?
_______________________________________________ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
