Sat, Nov 23, 2019 at 09:50:06PM +0000, Piegorsch, Weylin William: > You can also develop a custom type that doesn't call "show vlan".
please do this, rather than change ios.pm. This makes it easier for you to upgrade rancid, both of which i prefer because it is easier to support you. > Also, I've had this occur twice in the past. > - One time was happening campus-wide. I dug into it hard, and after a good > amount of effort found out there was something actually happening based on a > misunderstanding I had about native VLANs work in IOS. In other words: (a) I > learned something, and (b) I found I had an actual misconfiguration. > - The other time it turned out that there was a hardware fault on the ASIC > (we're actually still using that particular Catalyst 3508). I would like to understand why this occurs for some folks and change the code to automatically ignore show vlan output when the switch is configured in a manner that would lead to it. I know that VTP does this and sometimes 802.1x and the current code tries to recognize both of these. tia for any help here. _______________________________________________ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
