Hello Steve, This is a common issue that it picks up on the changes in the folder where your logs are being written. Had this with Cisco FRP firewalls. You have to patch the PM being used to ignore that folder. In your case, it is the debug folder. In ours it was the log folder. Be warned, when we were looking at the Cisco PM, we found several instances of duplicate code. So if you make a change and it does not fix the issue, then you need to look for that same code farther down in the module.
Best, -Troy > On Jan 20, 2023, at 4:16 PM, Steve O'Brien <[email protected]> wrote: > > I have just started to deploy Arista switches in my mostly Cisco network. My > first one that I added to Rancid is sending diffs every run: > > Index: configs/switch > =================================================================== > retrieving revision 1.8 > diff -u -4 -r1.8 switch > @@ -65,9 +65,9 @@ > !Flash: -rw- 568 Nov 2 2021 SsuRestore.log > !Flash: -rw- 568 Nov 2 2021 SsuRestoreLegacy.log > !Flash: drwx 4096 Sep 15 2021 aboot > !Flash: -rw- 18 Jan 10 2022 boot-config > - !Flash: drwx 4096 Jan 19 16:01 debug > + !Flash: drwx 4096 Jan 19 17:01 debug > > Any help would be greatly appreciated! > > > Steve O'Brien | Senior Network Administrator > > National Solar Observatory > > Daniel K. Inouye Solar Telescope Project > > 22 Ohi’a Ku Street, Pukalani, HI 96768 > > _______________________________________________ > Rancid-discuss mailing list > [email protected] > https://www.shrubbery.net/mailman/listinfo/rancid-discuss
_______________________________________________ Rancid-discuss mailing list [email protected] https://www.shrubbery.net/mailman/listinfo/rancid-discuss
