Hi!

It sound a bit like you have some sort of partial build. Tryk "make clean",
and re-build everything.

There should be a red box on the curve when you hover the image.


Regards, Klaus Post

http://www.klauspost.com


On Sun, Oct 17, 2010 at 17:51, David Vincent-Jones <[email protected]>wrote:

> Thanks Klaus for your quick response ...
>
> Something appears to have gone sideways on this build:
> RGB adjustments have disappeared from the menu;
> The curve text is no longer in place;
> The curve now shudders (as warned) but no values are indicated.
>
> David
>
>
> On Sun, 2010-10-17 at 17:08 +0200, Klaus Post wrote:
> > Hi!
> >
> > I've added display of the current pixel value in both the Curve and
> > ordinary histogram. I think the display of the current value was
> > removed to avoid the curve box flickering - so that "feature" is
> > unfortunately back.
> >
> > I've made the text brighter, but slightly smaller. I want it to be
> > visible, but not take too much focus from the tool.
> >
> >
> > Regards, Klaus Post
> >
> > http://www.klauspost.com
> >
> >
> > On Sat, Oct 16, 2010 at 18:23, Martin Christensen
> > <[email protected]> wrote:
> >         Seconded. This feature used to be included, but got lost along
> >         the way.
> >
> >
> >         Martin
> >
> >         Den 2010 10 16 17:53 skrev "David Vincent-Jones"
> >         <[email protected]>:
> >
> >
> >         > It would be very useful to be able to correlate specific
> >         image luminance
> >         > with a portion of the curve. Especially for B/W stuff.
> >         >
> >         > If, for instance, I was able to do a 'control click' on the
> >         image and a
> >         > vertical line was set on the curve indicating that local
> >         luminance it
> >         > would be enormously helpful and enable users to pinpoint
> >         values that
> >         > need adjustment.
> >         >
> >         > By the way, the curve window contrast is very low .... I
> >         have never been
> >         > able to read the 'upper left' text ..... can this be
> >         adjusted?
> >         >
> >         > Thanks;
> >         >
> >         > David
> >         >
> >         >
> >         > _______________________________________________
> >         > Rawstudio-users mailing list
> >         > [email protected]
> >         >
> >         http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users
> >
> >
> >         _______________________________________________
> >         Rawstudio-users mailing list
> >         [email protected]
> >         http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users
> >
> >
> > _______________________________________________
> > Rawstudio-users mailing list
> > [email protected]
> > http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users
>
>
>
> _______________________________________________
> Rawstudio-users mailing list
> [email protected]
> http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users
>
_______________________________________________
Rawstudio-users mailing list
[email protected]
http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users

Reply via email to