Klaus; I have a problem with printing from RS output. Hopefully you can set me straight. I export from RS with sRGB profile and print through Digikam. I can produce a 'similar' sRGB image directly in Digikam. Both image meta-data sets confirm that they have the same profile. The Digikam image prints correctly. The RS image is hopelessly dark.
If I open the RS image in Digikam and call for a profile change to sRGB or even just open the image and save to a new name (with sRGB profile) the dark printing problem goes away. My suspicion is that although the RS image meta-data indicates sRGB it is in fact lineal-sRGB. Currently to solve the problem I must thrash with each image in order to solve the problem .. very tedious. Your advice would be much appreciated; David On Sun, 2011-08-28 at 20:00 +0200, Klaus Post wrote: > Hi! > > >>Will this also allow for a wider selection of output profiles? > > Implementing more "standard" output colorspaces should be fairly > simple, I just cannot see any which have advantages that aren't > covered with the ones included now. Do you have any specific in mind? > > > Regards, Klaus Post > > http://www.klauspost.com > > > _______________________________________________ > Rawstudio-users mailing list > [email protected] > http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users _______________________________________________ Rawstudio-users mailing list [email protected] http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users
