Ok, so this brings up a further question. In the old days we could just exclude the working directory. So ... now we need exclude the extensions?
-----Original Message----- From: "A. Razzak Memon" <raz...@rbase.com> To: rbase-l@googlegroups.com Date: Mon, 29 Jan 2018 08:54:15 -0500 Subject: Re: [RBASE-L] - Speed Difference - Same APP Different Laptops & AV Software John, Make sure to configure the AV software with the exclusions as follows: . \RBTI\RBGXE\*.* . RBENGINE*.dll . RBGX*.dll . RStyleX.dll . OterroX*.dll -- if applicable . RBENGINE*.cfg . OterroX*.cfg -- if applicable . RSyleX.cfg . Compiledappname.exe . *.dat . *.eep . *.rbc . *.rbm . *.rgw . *.rff . *.rmd . *.rx* Hope it helps! Very Best R:egards, Razzak At 04:38 AM 1/29/2018, John Docherty wrote: >I am running the same application on two >different laptops, both Windows 10 64 Bit, >R:Base XE, one with Bitdefender (old machine) >and the other (new) with Windows Defender. I >find that with the same RX% files on both >machines, the starting screen (an external form) >will be displayed within about 5 seconds on the >old laptop, while on the new one it takes in >excess of 20 seconds. I have the same >configuration settings (as far as I can tell) >and find that this behaviour only happens with >R:Base. With RRBYW19 the start time is about 4 >seconds on the old machine and about 24 >seconds on the new one. (With CAD files the >newer machine opens files faster than the old >one, as it should.)  I was wondering if >anyone has any suggestions as to what may be >causing this significant difference in >performance. (According to a disc test I ran on >both, the transfer rates on the new laptop are >1500 MB/sec (write) and 3000 MB/sec (read), >while the rates are significantly lower on the old machine - all SSDs.) > >Is this likely to be due to the AV software, and >if it is, can I stop WD scanning RX? files >? (I tried installing BD on the new machine >but that created a few blue screens so I gave that idea up.) > >Any suggestions would be welcome. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php [http://www.rbase.com/support/usersgroup_guidelines.php] --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com [mailto:rbase-l%2Bunsubscribe%40googlegroups.com]. For more options, visit https://groups.google.com/d/optout [https://groups.google.com/d/optout]. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.