I think you can make the column filters read only. The filter bar will show but they cannot input in it.
[cid:image001.png@01D520F5.CA092150] Dan Goldberg From: 'Karen Tellef' via RBASE-L <rbase-l@googlegroups.com> Sent: Wednesday, June 12, 2019 7:13 AM To: rbase-l@googlegroups.com Subject: Re: [RBASE-L] - Filtering Enhanced DB Grid rows with PROPERTY commands I was going to say the same thing, I think you have to click the property to enable the filter bar There's other ways of doing it. One easy way is to make a 2-table form, with the states on the left and the table data on the right. Assuming that the name "State" is the only common column between the 2 tables, scrolling thru the list of states on the left will automatically update the grid on the right. Karen -----Original Message----- From: Dan Goldberg <d...@lancecamper.com<mailto:d...@lancecamper.com>> To: rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com> <rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com>> Sent: Wed, Jun 12, 2019 8:40 am Subject: RE: [RBASE-L] - Filtering Enhanced DB Grid rows with PROPERTY commands I think you need to have the filter bar enabled for it to work. your code looks good. Dan From: 'R Hopkins' via RBASE-L <rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com>> Sent: Tuesday, June 11, 2019 4:18 PM To: rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com> Subject: [RBASE-L] - Filtering Enhanced DB Grid rows with PROPERTY commands I have been trying to learn how to use the PROPERTY EnhDBGrid FILTER commands by trial and error, but without success. I am hoping someone can fill in the blanks for me. I am confident someone has done something similar to this before. One other note; I am using R:BaseX, not R:BaseX.5 SITUATION (not using my real data to keep it simple): I have a 3 column table named Contacts with 40 rows City TEXT 32 State TEXT 2 Zipcode INTEGER I have a form containing: An Enhanded DB Grid Property, Component ID: Places Table: Contacts I didn't click any property boxes related to filtering within this Property. A Variable Radio Group Property, Component ID: StateGroups that loads variable fState with one of 3 selectable values 'CA' or 'CT' or 'WA' WHAT I WANT TO DO I want to use the value loaded in variable fState to filter which rows are displayed in the Enhanced DB Grid. Every time a different Radio Button is selected, reloading the value of variable fState, have the rows displayed in the Enhanced DB Grid change to display only those in column State that match the value in variable fState. I don't want a filter bar displayed within the Enhanced DB Grid Property, as it will compete with the Radio Group for user's attention (and State is the only column to be filtered on). I want all filtering to occur behind the scenes using the PROPERTY commands. WHAT I HAVE TRIED To get this filter working, I have tried placing the following commands in the forms ON AFTER START EEP - just to see how they work - or not work. My expectation being that when the forms starts, it will display only rows WHERE state = 'CA' (my default for initial display). Attempt #1 = No rows filtered out, all 40 rows displayed PROPERTY Places FILTERS->COLUMN_NAME->state 'CA' Attempt #2 = No rows filtered out, all 40 rows displayed PROPERTY Places FILTERS->COLUMN_NAME->state->ADD_ITEM 'CA' Attempt #3 = Error message, "No rows exist or satisfy the specified clause" PROPERTY Places FILTERTYPE 'EQUAL' PROPERTY Places FILTERS->COLUMN_NAME->state 'CA' But none of these commands caused that to happen. Including the FILTERTYPE command results in No rows being found. I suspect there are additional commands required that I have not been able to identify. Note that I haven't introduced the variable fState into the commands yet to make my learning curve simpler. But once I can make the value 'CA' work, I should be able to replace it with .fState and use the PROPERTY commands within the ON CLICK EEP for the Variable Radio Group Property. The RBASE documentation is pretty good at describing what different commands do. This is an exercise for me to learn how to put all the commands together needed to implement a capability. I will be very thankful to anyone who can provide me the complete set of commands (and/or Enhanced DB Grid property item clicks) needed to make this work. NOTE I normally do this type of filtering using a Variable Lookup List View Property instead of an Enhanced DB Grid Property because it has a WHERE clause capability. But the Enhanced DB Grid Property had some features I want to use, like the footer for summing and the ability to center the header names within each column, etc. It also forces me to learn how to use the Enhanced DB Grid Property's filter capabilities. R Hopkins -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/1792940103.84756.1560295106406%40mail.yahoo.com<https://groups.google.com/d/msgid/rbase-l/1792940103.84756.1560295106406%40mail.yahoo.com?utm_medium=email&utm_source=footer>. For more options, visit https://groups.google.com/d/optout. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/2E4830CEC16615458329D3D83342F8D0011EA2DB76%40EXCHANGE10<https://groups.google.com/d/msgid/rbase-l/2E4830CEC16615458329D3D83342F8D0011EA2DB76%40EXCHANGE10?utm_medium=email&utm_source=footer>. For more options, visit https://groups.google.com/d/optout. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/1996733075.166383.1560348782558%40mail.yahoo.com<https://groups.google.com/d/msgid/rbase-l/1996733075.166383.1560348782558%40mail.yahoo.com?utm_medium=email&utm_source=footer>. For more options, visit https://groups.google.com/d/optout. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/2E4830CEC16615458329D3D83342F8D0011EA2E281%40EXCHANGE10. For more options, visit https://groups.google.com/d/optout.
