Sure enough, the SKIP TO [VariableRadioGroup-Tab#1] construct works the
same as the SETFOCUS property which gets me to
[VariableRadioGroup-Tab#1].
But neither constructs trips blanking of the NULLed variables' controls
during the rotation.
Setting SKIP TO [NeedsToBeBlanked-Tab#2], blanks that one control, but
control [NeedsToBeBlanked-Tab#3] is not blanked until I Tab into it.
Under the covers the variable values are what they should be at every
point in time; it's the "ghost" values in the
[NeedsToBeBlanked-Tab#n...nx] controls that are the issue.
Thanks for hanging in.
Bruce A. Chitiea
SafeSectors, Inc.
-----------------------------------
112 Harvard Ave #272
Claremont CA 91711-4716
-----------------------------------
rby...@safesectors.com
-----------------------------------
+011 (909) 238-9012 c
+011 (909) 912-8678 f
------ Original Message ------
From: "Buddy Walker" <walker.bu...@comcast.net>
To: rbase-l@googlegroups.com
Sent: 7/5/2020 5:52:53 PM
Subject: Re: [RBASE-L] - Variable Forms | Clearing Values within EEPs.
Instead of using SETFOCUS why not use SKIP TO this would be the same as
TAB. I would still RECALC VAR before the Skip To
Sent from my iPhone
On Jul 5, 2020, at 8:12 PM, Bruce Chitiea <rby...@safesectors.com>
wrote:
Thank you, Buddy. On closer inspection, after I sent my message, I
TRACED the variable subset as its values were NULLed just before the
SETFOCUS.
The RECALC VAR has no effect on this:
What is in fact happening is that the DISPLAY of those variable values
is not being cleared from their Variable Edit controls during the
rotation.
But when I Tab away from the first control in the Tab Order [a
Variable Radio Group - one of the retained values ], the VE controls
for the NULLed variables go blank, as intended.
So the real question is: How does one blank the display of now-NULLed
previous values within their associated controls?
Much appreciated!
Bruce A. Chitiea
SafeSectors, Inc.
-----------------------------------
112 Harvard Ave #272
Claremont CA 91711-4716
-----------------------------------
rby...@safesectors.com
-----------------------------------
+011 (909) 238-9012 c
+011 (909) 912-8678 f
------ Original Message ------
From: "Buddy Walker" <walker.bu...@comcast.net>
To: rbase-l@googlegroups.com
Sent: 7/5/2020 4:43:38 PM
Subject: Re: [RBASE-L] - Variable Forms | Clearing Values within EEPs.
Bruce
Have you tried RECALC VAR after settling them to null and before
the setfocus
Buddy
Sent from my iPhone
On Jul 5, 2020, at 6:24 PM, Bruce Chitiea <rby...@safesectors.com>
wrote:
RGBX5E Current
Fairly new to Forms.
A Variable Form provides values to an On Click EEP in a Bit Button.
The EEP succeeds at its tasks, then returns FOCUS to the first
control in the Form's Tab Order, as intended.
One subset of variable values survive the rotation, as intended. A
second subset of variable values must be NULLed during the rotation,
so that their associated controls are blank when the Form reappears.
I've failed to clear this latter group of values, variably using
CLEAR VAR and SET VAR = NULL commands:
(a) ahead of the SETFOCUS at the tail end of the Bit Button's On
Click EEP;
(b) in the Bit Button's On Exit EEP;
(c) in the On After Start EEP of the form itself.
It's gottta be something basic.
What is the established procedure for clearing a subset of variable
values when rotating directly back into a form from a prior
instance?
Rockets Red Glare, Bruce
Bruce A. Chitiea
SafeSectors, Inc.
-----------------------------------
112 Harvard Ave #272
Claremont CA 91711-4716
-----------------------------------
rby...@safesectors.com
-----------------------------------
+011 (909) 238-9012 c
+011 (909) 912-8678 f
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google
Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/emefe264b1-e9f3-4ab0-9473-d2851d506e75%40pathfinder
<https://groups.google.com/d/msgid/rbase-l/emefe264b1-e9f3-4ab0-9473-d2851d506e75%40pathfinder?utm_medium=email&utm_source=footer>.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google
Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/0664CAAD-6C9D-4CD1-B29B-99260ED49DDE%40comcast.net
<https://groups.google.com/d/msgid/rbase-l/0664CAAD-6C9D-4CD1-B29B-99260ED49DDE%40comcast.net?utm_medium=email&utm_source=footer>.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google
Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/em0f0095d9-e3fa-47ce-861b-c31e0f8cfc28%40pathfinder
<https://groups.google.com/d/msgid/rbase-l/em0f0095d9-e3fa-47ce-861b-c31e0f8cfc28%40pathfinder?utm_medium=email&utm_source=footer>.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google
Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/773C482E-7FA0-4730-B0E2-B03381AB1EF2%40comcast.net
<https://groups.google.com/d/msgid/rbase-l/773C482E-7FA0-4730-B0E2-B03381AB1EF2%40comcast.net?utm_medium=email&utm_source=footer>.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/em9e6190cc-f0bc-4593-bc40-ca26a96105ef%40pathfinder.