I have a single user license. I tried as you said and it gives me the error that "Current installation does not support MULTI-user database"
I think there are two updates, one for single users and one for multi-users. If you have the multi-user there are no problems but if you have the single-user(me) then you can not have multiple sessions!! Dan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Bernie Corrigan Sent: Monday, February 03, 2003 1:10 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: 1.864 and Multi-user - Razzak's Reply Dan - Try this: Disconnect from the database, click on settings, see if Multi-user is still grayed out. Let me know if it is. You can't change while you are connected to a db. I have, as I write this, two 1.864 sessions connected to the same database simultaneously. The multi-user option is grayed out whenever RBase is connected to a database. Disconnect and the multi-user choice should become operational again. Bernie -------------------------------------- At 09:37 PM 2/2/2003 -0800, you wrote: > >I used to be able to open more than one session but now I can't. I used to >do order entry in one session and do other things with another session. We >have talked about multiple sessions many times on the list and it used to be >a valuable tool. > >I read the license and it states that one computer, one user per license. It >does not state multiple sessions. I feel we have lost a valuable feature. > >Dan > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of A. Razzak >Memon >Sent: Sunday, February 02, 2003 8:26 PM >To: RBASE-L Mailing List >Subject: [RBASE-L] - Re: 1.864 and Multi-user - Razzak's Reply > > > >At 12:52 PM 2/3/2003 +1000, Edwards Lucas wrote > >>Hi Razzak >>Apologies if you've already answered this but our mail server has ground >>to a halt this morning. >>Have just upgraded to Build:1.864xRT03 and found that MULTI is greyed out >>in settings. >>Disconnected the db and SET MULTI ON. >>Am told "Current installation does not support MULTI-user database >>operations." >>I've now rolled it back to 1.862 and everything's fine. >>What gives? > > >01. How many users are on your network? > >02. Did you purchase the Single-User and Additional LAN License(s) for >your Network Users? > >03. If you have purchased the product for single use only, you won't be >able to use the product > for multi-connections on the same database. > >04. If you have purchased the Additional License(s) for Network, then >you may contact RBTI > Support and Services directly at 724.733.0053 or via e-mail at >mailto:[EMAIL PROTECTED] > >Should you require further assistance, you are welcome to contact me >privately. > >Very Best Regards, > >Razzak. > >
