At the r> on the problem computer type SHOW NAME This will let you know if the desired cfg file was found ans the NAME will be correct.
Also check that the temp and tmp enviroment variables are correct. Also check shortcut to make sure no ems is allowed. Has to be some local issue, or an issue with the cfg path. Dennis McGrath --- Jim Limburg <[EMAIL PROTECTED]> wrote: > Razzak, Javier > > RBase is in one directory on the network, the db's are in the same > directory.. > so the rbase version has to be the same.. I have not found hardly any > difference > in running rbase on the network comapared to local and db's being on > the net. > Each user's CFG file is the identical except for the NAME tag. > Each user starts rbase with a shortcut defined like this: > K:\rbti\RBDOS65\RBASE65.EXE -ok:\rbusers\username\rbase.cfg -r > --The username here is the users network/login name, and the cfg file > --like I said is a copy of the other, except for the NAME tag within > the file > > I set mess and err mess on > conn with user 2.. > checked staticdb .. it was OFF > left this user connected > > went to user on > set mess and err mss on > checked staticdb .. it was OFF > attempted to conn > got error 7 cannot connect to db > > went to my machine -- I have same setup/rights as user one -- network > admin > I can connect just fine > > This is most puzzling > Still banging head > Jim Limburg > > A. Razzak Memon wrote: > > > > At 04:50 PM 6/17/2003 -0400, Jim Limburg wrote: > > > >> 4. Cannot connect using CONN at R:> for this user.. > > > > > > > > Jim, > > > > While everyone else is successfully CONNected to the same database > > on the network, follow the steps below on his/her workstation to > narrow > > it down: > > > > 01. Re-Start/Boot user PC for fresh start > > > > 02. Start R:BASE 6.5++ for DOS (Build:1.866xRT03) > > > > 03. Make sure that MESSAGES and ERROR MESSAGES are ON > > > > At the R> prompt: > > > > SET MESSAGES ON > > SET ERR MESS ON > > > > 04. At the R> prompt: > > > > SHOW VERSION > > (to make sure that he/she is using the right build/version) > > > > 05. At the R> prompt: > > > > SHOW MULTI > > (It should be ON) > > > > 06. At the R> prompt: > > > > SHOW STATICDB > > (compare that with other CONNected users. They all MUST > follows the > > same rule when connected to the same database in a > multi-user > > environment) > > > > 07. At the R> prompt, manually switch to the network drive, for > > > example: > > > > F: > > CD \DBDirectory > > CONN dbname IDENTIFIED BY OwnerName Password > > > > What happens? > > > > Good Luck! > > > > Very Best R:egards, > > > > Razzak. > > > > >
