Thanks Javier,
Your approach is much like I used to do, and will probably return to, and your results of different filenames is what I normally experience. Something seems to go wacky after a while during a long session. I'm currently going through all the changes I have made over that last several months, looking for clues. The main form everyone uses is very complex and I keep adding features. They stay in this one form (loading other forms, reports, and routines from it) all day long, even though I recommend closing the session when they go to lunch or break. I probably need to simplify this form. Break it up into several separate forms. This would reduce the memory needed for variables and objects. Kenny From: [email protected] [mailto:[email protected]] On Behalf Of Javier Valencia Sent: Wednesday, April 21, 2010 9:02 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Need help on (filename(0)) and Scratch settings - RBase 7.6.8.3031 for Windows full and compiled versions. Kenny, This is the command I use to set my scratch file: CLEAR VAR vChkFile SET VAR vChkFile INTEGER = NULL SET VAR vChkFile = (CHKFILE('C:\TEMP')) IF vChkFile <> 1 THEN MD C:\TEMP ENDIF SET SCRATCH C:\TEMP I wrote a little snippet to test the filename(0) function as follows: -- Code to test FILENAME(0) SET VAR vFile = (FILENAME(0)) WRITE .vFile SET VAR vFile = (FILENAME(0)) WRITE .vFile SET VAR vFile = (FILENAME(0)) WRITE .vFile SET VAR vFile = (FILENAME(0)) WRITE .vFile SET VAR vFile = (FILENAME(0)) WRITE .vFile RETURN When Irun the code from the R> prompt, I get the following results: R>run x.rmd C:\TEMP\4bcfaace.$$$ C:\TEMP\4bcfaacf.$$$ C:\TEMP\4bcfaad0.$$$ C:\TEMP\4bcfaad1.$$$ C:\TEMP\4bcfaad2.$$$ R>run x.rmd C:\TEMP\4bcfaad6.$$$ C:\TEMP\4bcfaad7.$$$ C:\TEMP\4bcfaad8.$$$ C:\TEMP\4bcfaad9.$$$ C:\TEMP\4bcfaada.$$$ R>run x.rmd C:\TEMP\4bcfaadb.$$$ C:\TEMP\4bcfaadc.$$$ C:\TEMP\4bcfaadd.$$$ C:\TEMP\4bcfaade.$$$ C:\TEMP\4bcfaadf.$$$ R>run x.rmd C:\TEMP\4bcfaae4.$$$ C:\TEMP\4bcfaae5.$$$ C:\TEMP\4bcfaae6.$$$ C:\TEMP\4bcfaae7.$$$ C:\TEMP\4bcfaae8.$$$ Which is the expected behavior. Is this where you are getting repeated filenames? Also, if you are using the generated names and you have a path with long names and/or spaces, you definitely need to enclose the expression in quotes. You might try setting the scratch setting to something simple such as C:\TEMP and see if that helps. BTW, I am on 7.5. Javier, Javier Valencia, PE 913-829-0888 Office 913-915-3137 Cell 913-649-2904 Fax <mailto:[email protected]> [email protected] _____ From: [email protected] [mailto:[email protected]] On Behalf Of Kenny Camp Sent: Wednesday, April 21, 2010 5:25 PM To: RBASE-L Mailing List Subject: [RBASE-L] - Need help on (filename(0)) and Scratch settings - RBase 7.6.8.3031 for Windows full and compiled versions. Hello List, I thought I had a pretty good understanding of temp files and scratch settings but. Recently, my programs have started having more and more failures to create temporary files in several situations for multiple users. Scratch files are always set to tmp unless I change it during troubleshooting. I created a button to capture scratch setting to verify location. The problem does not start immediately after a new session, reports and (filename(0)) work as expected as first. But after a while, (1st issue) printing a very simple report to the screen with no breaks or eeps results in an error C:\docume~1\kenny\locals~1\temp\4bcf107f.$$$ not found! This error is displayed twice even though the report looks OK. These messages are displayed because I have the error messages set ON in order to report if no data found (2059) (error variable stays at 0 even when no data). I checked the scratch directory above and there were $$$ files in the scratch directory but not the one reported in the error. Once this happened, (2nd issue) I tried running a different style of report that captures a select statement or tally to a text file. I test for the existence of the result of set v vfname text = (filename(0)) and if it does not exist, pause for 1, then try again. The loop failed the 5 times it loops, aborted. Each failure was the same file name exactly. I thought the filename is created by/affected by the time (seconds?) but I waited over an hour (same session) and it is still failing to create this same exact file name. Is there a way to seed this process (filename(0)) with a new filename so my users do not have to close and start a new session? I changed my scratch setting to c:\ and it still reported C:\docume~1\kenny\locals~1\temp\4bcf107f.$$$ not found! Same file, same location. Any Ideas what I have done to cause this or what is happening? Confused in OKC, Kenny
