Dennis,
That won't work at the form level, but if you put a panel on the form and
put all your controls on the panel, the panel can be enabled and disabled to
effect everything in the container.
----- Original Message -----
From: "Dennis McGrath" <[email protected]>
To: "RBASE-L Mailing List" <[email protected]>
Sent: Wednesday, October 20, 2010 4:55 PM
Subject: [RBASE-L] - Re: Odd form behavior
Just running it cold by itself
________________________________
From: [email protected] [mailto:[email protected]] On Behalf Of Jason Kramer
Sent: Wednesday, October 20, 2010 3:01 PM
To: RBASE-L Mailing List
Subject: [RBASE-L] - Re: Odd form behavior
If you are disabling the form in a while loop, try running the loop with
WHILEOPT set to OFF.
Jason
Jason Kramer
University Archives and Records Management
002 Pearson Hall
(302) 831 - 3127 (voice)
(302) 831 - 6903 (fax)
On 10/20/2010 3:54 PM, Dennis McGrath wrote:
RBASE 7.6
On the click of a button:
1. disable the form
2. run a lengthy process (refresh a listview)
3. enable the form
We click the button and then click anywhere on the form.
Because the form is disabled, nothing on the form should respond.
When the process finishes, and the form is enabled, it responds to the bogus
clicks.
It is obvious from the appearance of the form that it is not getting
disabled.
If I trace the code, the form disables/enables correctly
Anyone know how to fix this?
Dennis McGrath
