Rich, Have you "TRACE"d your code and made sure all the variables are properly defined and typed prior to running the report? Are "tray1" and "duplexmode" variables? If not, you do not need the "&" in front of them. What happens if you run the report with no conditions at all, such as...PRINT labelsrecap... does it run OK? Try adding one condition at the time and see which one is causing the problem. If it runs correctly then try adding one "OPTION" at the time and see where it hangs. Once you figure out what part is causing the problem we might be able to be of more help. Also, have you tried building a command variable and the n running it?
Javier, Javier Valencia, PE O: 913-829-0888 H: 913-397-9605 C: 913-915-3137 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of richard jasinski Sent: Wednesday, October 28, 2015 10:50 AM To: [email protected] Subject: [RBASE-L] - 9.5 print issue I just converted to 9.5 from 7.6 I have report print that will not work now. Here is the code: SET VAR tray1 TEXT = 'MP Tray' PRINT labelsrecap WHERE adv_no = .vadvno AND rs_no < '500' OPTION PRINTER|DUPLEX &vduplexmode|TRAY &tray1|PRINTER_NAME &vprintername Screen just flashes then stops. Rich
