Steve, I use these two report eeps to manipulate the printer. These are
in 95_64. Perhaps they can give a couple of blues clues. ;) Both of the
eeps are embedded in the report. You need to pass the Windows printer
name exactly to the application. We use a one row table FormTable
(thanks Razzak) for this type of data that is applicable to the whole
application.
If you have R:Docs, you can figure out all the PRNSETUP commands you
might need, otherwise use the help screens. The "HORIZONTAL" parameter
tells the printer to set page 2 as a three ring binder page turn: long
side (portrait orientation). There is a VERTICAL parameter available to
print in landscape orientation. There are various PRNSETUP commands
available to set paper size, tray select and so forth.
Albert
***********************************
On Before Generate EEP
SET VAR vInvoicePrinter TEXT = NULL
SELECT InvoicePrinter INTO vInvoicePrinter INDICATOR i1 FROM
FormTable +
WHERE ColumnZZ = 1
PRNSETUP .vInvoicePrinter
PRNSETUP DUPLEX HORIZONTAL
RETURN
***********************************
On After Generate EEP
SET VAR vInvoicePrinter TEXT = NULL
SELECT InvoicePrinter INTO vInvoicePrinter INDICATOR i1 FROM
FormTable +
WHERE ColumnZZ = 1
PRNSETUP .vInvoicePrinter
PRNSETUP DUPLEX SIMPLEX
RETURN
*************************************
On 2015-11-09 9:59 PM, Steve Johnson wrote:
To All:
Does anyone have an application that prints to a Evolis Primacy Card
Printer, on both front and back sides, using CR80 landscape as default
size?
My Rbase application prints the front side with no problem, it is how
to setup a label or report to print the back side. The printer is
capable of operating in the duplex mode.
Thanks
Steve Johnson
