Bernie,
You might want to install the file from Novell's site PU3X01.EXE. This has
the printserver files version 3.75. It looks like this is the latest printer
stuff. You should make sure to back up all of the files it replaces first,
because this is for 3.12, but will probably work on 3.11 just fine.
Troy
>===== Original Message From [EMAIL PROTECTED] =====
>Thanks Troy, but depending on what they are printing determines which of 3
>printers they would use, so I have to capture on the fly. Is there a later
>capture.exe than 10-4-94 ? The capture.exe prog resides in the database
>directory, so I don't think that path has anything do to with it.
>
>----- Original Message -----
>From: "Troy Sosamon" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Saturday, August 04, 2001 5:34 PM
>Subject: RE: convert 5.5 dos to 6.5++ dos - Razzak's Reply
>
>
>> I would capture the printer port before you start R:base.
>>
>> Troy
>>
>>
>> >===== Original Message From [EMAIL PROTECTED] =====
>> >Bernie,
>> >
>> >Looks like there is something else going on with
>> >your Novell Netware Capture stuff! I would suggest
>> >to check the network settings, etc.
>> >
>> >Also, make sure that you have the latest R:BASE
>> >for DOS in PATH.
>> >
>> >FYI, R:BASE 2000 (version 6.5++) for DOS, Build:
>> >1.842xRT03, released on June 15, 2001 is the
>> >latest version!
>> >
>> >Very Best Regards,
>> >
>> >Razzak.
>> >
>> >At 02:41 PM 8/3/2001 -0400, Bernie Lis wrote:
>> >>I followed the steps below to the letter. Then I executed the program
>and
>> >>it hung showing me a completely blank screen. All I could do was ctl alt
>> >>del, and it was at RBase-capture. I presume it was trying to capture
>the
>> >>printers. (Novell 3.11). The capture.exe is dated 10-4-94. Is that my
>> >>problem? Is there a newer version for 6.5++?
>> >>
>> >>----- Original Message -----
>> >>From: "A. Razzak Memon" <[EMAIL PROTECTED]>
>> >>To: <[EMAIL PROTECTED]>
>> >>Sent: Thursday, August 02, 2001 4:41 AM
>> >>Subject: Re: convert 5.5 dos to 6.5++ dos - Razzak's Reply
>> >>
>> >>
>> >>> Bernie,
>> >>>
>> >>> Follow these steps:
>> >>>
>> >>> 01. Launch The R:edoubtable R:BASE 2000 (ver 6.5++)
>> >>>
>> >>> 02. At the mighty R> prompt:
>> >>> SET AUTOUPGRADE ON
>> >>> SET AUTOCONVERT ON
>> >>>
>> >>> 03. CONNect DBName
>> >>>
>> >>> 04. Adjust/Verify DATE CENTURY and DATE YEAR settings
>> >>>
>> >>> 05. SET IDQUOTES=`
>> >>> (that is single reversed quote)
>> >>>
>> >>> 06. Make sure to RELOAD the database.
>> >>>
>> >>> There you have it ...
>> >>>
>> >>> Enjoy and make sure to have fun!
>> >>>
>> >>> Cheers,
>> >>>
>> >>> Razzak.
>> >>>
>> >>> --- Bernard Lis <[EMAIL PROTECTED]> wrote:
>> >>> > Should I be able to just connect a 5.5 database with
>> >>> > 6.5++ and it will auto convert?
>> >>> > Or do I have to do an intermediate conversion?
>> >>> > Because it didn't convert correctly when i just did
>> >>> > a connect.
>> >>> >
>> >>> > Bernie Lis
>> >>> > Megabytes, Inc.
>> >>> >
>> >>>
>> >>>
>> >>> __________________________________________________
>> >>> Do You Yahoo!?
>> >>> Make international calls for as low as $.04/minute with Yahoo!
>Messenger
>> >>> http://phonecard.yahoo.com/
>> >>
>> >>
>> >===================================-============================
>> >R:BASE Developers's Conference: http://www.rbase.com/conference
>> >Official R:BASE List Server: mailto:[EMAIL PROTECTED]
>> >RBTI Events/Training: http://www.rbase2000.com/events
>> >R:DCC Members: http://www.rbase2000.com/rdcc
>> >================================================================
>> >R:BASE, Oterro & R:Tango are registered trademarks of RBTI.
>> >==================================-=============================
>>
>> Troy Sosamon
>> Denver Co
>> [EMAIL PROTECTED]
>>
Troy Sosamon
Denver Co
[EMAIL PROTECTED]
