Try playing around with larger numbers of lines, > 59. I have found that getting the right page length for a given font (or fonts) is an art, not a science, and that 75 lines seems to be a somewhat magic number.
======================================== At 09:24 AM 10/22/2001 -0500, you wrote: > >I am using RBase for windows 6.5+ build 1.839xRT03. I have a designed a >report base on a three part laser check. A single check contains >summary data and the actual check information. The report consists of >one large break footer section. I cannot seem to find the correct >report settings to print all of the information on page. It is not that >I have too much data. I am trying to lay the report out in such a way >that the top part has the summary information, the middle and the bottom >have the check information. I have placed all of the field ands >variables appropriately on the report with what I can tell in allowable >limits, but it does not work. The fuzzy logic that I am using says that >a sheet of paper is 8 1/2 x 11, so I should be able to make the break >footer section somewhere between 10 and 11 inches long. If I put any >fields or variables (for the third section of the check) below 7 or 8 >inches those items get printed on second page. The report settings have >59 lines per page, form feed after report footer, and portrait >orientation. I have tried changing the lines per page to 0 and -1 but >still get the same results. > >Any ideas as to how I can use the entire page? > >Thanks, >Damian > >
