Troy,
I checked it with autochk - no errors
I just reloaded it.
I do have a UPS attached. It appears to be working fine but, I am going to
switch it with another. Had our electrician check the circuits in my office,
some variation, but seems to think it's normal.
I have had the HDD, CD-RW, Motherboard with integrated NIC, and finally the
Memory ( I couldn't copy this db on my HDD to my personal folder on the
network, would drop the connection) replaced in that order on this machine
since purchasing it in June of last year. I have a problem with fragmented
files also.
I tried earlier this morning to del from and load 4 tables and was
unsuccessful, I waited approx. 1 hour, tried again, worked - no problem. We
thought maybe it was a licenseing issue with Novell - 10 user license so we
shut down a PC on the network - seemed to help but same problems
re-occurring again.
Thanks,
Sue
----- Original Message -----
From: "Troy Sosamon" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 06, 2002 11:13 AM
Subject: RE: Multi User
> Sue,
>
> Have you checked your database for corruption with autochk?
> Have you reloaded it reciently?
> Do you have a UPS on your machine?
>
> You could get these errors if you have some corruption in your database.
> You might have a hosed index that would not show up with autochk, but
might
> cause problems during a delete.
>
> Most of the time when you start getting corruption in the database I have
> found it to be from not having a UPS on the machine. Sometimes you see
> brownouts in the electricty that may not cause your machine to reboot, but
> can cause it to not finish some operationsl.
>
> Troy Sosamon
>
> ------ original message
> Hi All,
> I am working on a db on my hard drive and sometimes when trying to del
from
> a table I get an error message:
> Multi User Message: Resources required by command are not available. Has
> anyone else had this problem?
>
> Also, on this db the quote setting was originally set as double (") I have
> changed to single (') and Idquotes was blank, I try to change to ` but it
> doesn't hold after saving and closing out of the settings. I have changed
> the .cmd and .eep files. I did a replace " with '. Any help would be
> appreciated.
>
> Thanks,
> Sue Seelye
>
> ================================================
> TO SEE MESSAGE POSTING GUIDELINES:
> Send a plain text email to [EMAIL PROTECTED]
> In the message body, put just two words: INTRO rbase-l
> ================================================
> TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED]
> In the message body, put just two words: UNSUBSCRIBE rbase-l
> ================================================
> TO SEARCH ARCHIVES:
> http://www.mail-archive.com/rbase-l%40sonetmail.com/
================================================
TO SEE MESSAGE POSTING GUIDELINES:
Send a plain text email to [EMAIL PROTECTED]
In the message body, put just two words: INTRO rbase-l
================================================
TO UNSUBSCRIBE: send a plain text email to [EMAIL PROTECTED]
In the message body, put just two words: UNSUBSCRIBE rbase-l
================================================
TO SEARCH ARCHIVES:
http://www.mail-archive.com/rbase-l%40sonetmail.com/
