I went looking for Newbaum's locally but couldn't find any. I found some Evo cloth tape that matches the red accents on the Betty Foy just perfectly, so that's what I'll be using. I think I will leave the cables exposed. Trying to tape them down is just one more thing for me to muck up, and since they're not in the way, I should probably leave well enough alone.
Thanks, Sean! On Monday, June 16, 2014 12:26:47 PM UTC-7, sean wrote: > > I would say just wrap from the lever clamps down toward the stem. Leave > the cables exposed. I don't have any shifters in the way (mounted downtube) > and I didn't have to remove anything from the bars. Just started a little > past the lever clamp and wrapped down to about an inch/inch and a half from > the stem. Newbaums followed by a couple of coats of shellac. Makes for a > nice grip-able area and elegant too. Left the space near the stem for > mounting bell, headlight, etc. > > Sean > > >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
