FS: Nitto Marks Rack and Platrack - $165 shipped CONUS
This has been sitting in my parts bin for a while now, it needs to get some use. Included is a Nitto Mark’s Rack, Platrack, 4 Nitto Rack Bolts, 2 short rods, 2 medium rods, 2 new long rods, front and rear diving board plates and 1 homemade diving board plate made by a fellow lister. You’ll need to provide the 5m bolts to attach the platrack and the diving board plate to the rack. The 4 Nitto Rack Bolts are all you’ll need for whatever set-up you choose. The front original diving board plate may need some adjusting to make it perfectly straight, but you can do that with a pliers. There are a few places with spot rust, but most has been buffed out with Simi-chrome. If you have any questions about it send them along. https://www.flickr.com/photos/120703118@N08/sets/72157646828933470/ -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.