Hi All,
Does anyone see any issues with using a one of the Tektro fork-mount cable stops <http://www.rivbike.com/product-p/ca15089.htm> that Riv sells on the seatstay bridge on a Bombadil, for the rear brake? The only thing that makes me hesitate is the possibility of destroying the seatstay bridge, for example if canti frames have “less beefy” seatstay bridges than sidepull frames, because one wouldn’t normally mount a brake there. I guess when I squeeze the brake lever I will put quite a twisting load on the bridge… By the way I’m aware that the normal thing to do is use a cable stop that mounts to the seatpost binder bolt. I’d like to avoid that but it’s plan B if the seatstay bridge is not possible. Thanks, Tom -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
