Kelly, if I were starting life all over all my bikes would have Paul's neo retro cantis. I have the Racer brake on my tandem with 38 mm tires and managed to squeeze in 60 mm VO fenders. The brakes are specked for on 54 mm which still leaves room for a 55 mm vender which could work. I know they're expensive but they will last a lifetime and all the small parts are available and affordable. Here are the specs.
http://www.paulcomp.com/shared/instructions/racer.pdf Michael On Thursday, June 4, 2015 at 11:17:54 PM UTC-4, Kelly wrote: > > Ok so I'm at a point that I don't want to go back to 700x33.3 32 etc but > love my 700x37's and my favorite for now the Barrlow Pass 38's. However > fender clearance is limited due to side pull brakes... currently running > silvers. > If the brakes just had more center of tire clearance. So been > thinking center pulls.. maybe... or just adding adapting the bike to > canti's and repainting. > > So my bertholds would work but bump it once and it rub and then they > cracked so in a pinch I threw on some sks fenders I had in the garage. > > Ideas? Side pull brakes with a higher arch? 68 atlantis? lol The > AHH is like my perfect bike.. and I'm nitpicking but seems there should be > a solution....:) > > thanks > > Kelly > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
