Yes, that is the link to the Cheviot with the front rack I forgot to 
include in my original post.

Thanks for all the insightful commentary and for giving me ideas. 

Since the Cheviot & Betty Foy front fork has attachment points at the 
midpoint and tip, then the rack might as well use them.

Thanks again.

On Sunday, June 7, 2015 at 2:20:18 AM UTC-4, Takashi wrote:
>
> You mean this one?
> http://rivbike.tumblr.com/post/117015627924/wills-60cm-cheviot
> It looks like a Two Strut Top Rack which Riv used to sell, but it's no 
> longer on Riv website.
> It's similar to R-14 rack, but modified so that you can use two pairs of 
> strut.
> Maybe with some creativity you can make R-14 to work as a front rack.
>
> This Cheviot:
> http://rivbike.tumblr.com/post/116494687519/sams-and-chevs
> has Mark's rack on front, and has a smaller basket than Will's cheviot.
> So if you are using smaller basket, then Mark's rack would work fine.
>
> Takashi
>
>
> 2015年6月6日土曜日 14時53分44秒 UTC+9 D Yat:
>>
>> Seeking advise on a front rack for a Betty Foy.   I just want to put a 
>> basket up front (and not carry low-mounted panniers.)
>>
>> The photo of the Chevoit on this old blug post has a nice looking front 
>> rack that would probably work with the Betty Foy (it has the same or 
>> similar front fork lowrider mounts and bottom eyelets).  Can anybody 
>> identify it?  It looks similar but a little bigger than a Mark's rack 
>> (http://www.rivbike.com/product-p/r1.htm)
>>
>> I would like to carry more than the 6-lb weight limit for the Mark's rack.
>>
>> Thanks for any suggestions
>>
>>
>>
>>
>>
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Reply via email to