Patrick - I'd recommend that you send a question to Cody via his website ( http://www.woodysfenders.com/store/index.php?main_page=contact_us), regarding your width and radius needs. I've bought 2 sets of fenders and 2 chop chort fenders, and 3 of the 4 purchases had some customization involved. I bet he'd be happy to make a set of narrower 26" fenders, and you can ask about customizing the hardware options as well. I bought extra hardware from him at a reasonable price, you could likely ask to not have the hardware installed if you'd like to configure it yourself.
Regarding finish and durability, I've probably not ridden mine long enough, or, they're just holding up remarkably well. Cody includes some notation suggesting the use of car wax a couple times a year. I've not done so yet, and I've been through some gnarly rain and muddy conditions to no noticeable ill effect. I really probably should do something before winter weather sets in. On Wed, Oct 14, 2015 at 7:22 PM, Patrick Moore <bertin...@gmail.com> wrote: > One last question: I think of using a *single* eyelet from a Berthoud > fender on a flat wood fender. I know that such attachment makes metal > liable to crack, but is not wood tougher in this respect? I'd washer it > well front and back. > > Is this a good or a bad idea? > > On Wed, Oct 14, 2015 at 5:20 PM, Patrick Moore <bertin...@gmail.com> > wrote: > >> Educate me on wooden fenders. I would prefer metal, but no one makes >> metal fenders that easily fit my particular frame, which needs ~40 mm X 559 >> and with a shallow curve profile -- the closest available in the US and >> Britain, to my queries, is the Berthoud 650B X 40, but that has a too tight >> cross section. >> >> I know about Woody's custom fenders, and Cody is at the top of my list >> right now, but does anyone else make a fender, flat or shallowly-curved, >> that will fit into a tight space over a 26 X 33 mm tire? (There is ample >> space, but only for a road-width fender in the 26" size.) >> >> I know I can make a 27" X 40 mm SKS longboard work, but I'd rather have >> something with Berthoud-type hardware. >> >> For pricing reasons -- even my spendthrift soul balks at $200 shipped for >> custom curved fenders -- I think I'll choose flat fenders; customs at $135, >> about what a pair of Honjos cost. >> >> Are there sources for cheaper, flat wood fenders in 26" but narrower than >> 2+ inches? All I've seen in 26" are these wide ones. >> >> Next question: can one safely, for the long term, coax a tighter bend >> into a 27" flat fender? If so, I could buy a cheaper 27" X 40 mm and cut >> and shape to fit. >> >> 3d question: are wood fenders durable, without repeated varnishing? Here >> in high desert ABQ, I'd probably have to take the sun as much as water into >> account. >> >> Last question: is bamboo better than other woods for fenders? I have no >> reason to think it is, except that I've played around with bamboo -- I >> lived as a boy in bamboo countries, India and Kenya -- and I know it is >> pretty darn flexible and strong. >> >> Any other advice about wood fenders will be welcome. >> >> Note: I know that flat fenders won't give me protection as good as deeper >> profile fenders, but I've used flat ones enough to know that they're >> certainly better than nothing: when puddles are shallow, they work fine; >> and when they're deep, even Honjos or Berthouds don't protect you fully. A >> 40 mm wide flat fender will be very useful. >> >> -- >> Resumes, LinkedIn profiles, bios, and letters that get interviews. >> By-the-hour resume and LinkedIn coaching. >> Other professional writing services. >> http://www.resumespecialties.com/ >> www.linkedin.com/in/patrickmooreresumespec/ >> Patrick Moore >> Alburquerque, Nouvelle Mexique, Vereinigte Staaten >> >> ************************************* >> *The point which is the pivot of the norm is the motionless center of a >> circumference on the rim of which all conditions, distinctions, and >> individualities revolve. *Chuang Tzu >> >> *Stat crux dum volvitur orbis.* Carthusian motto >> >> > > > > -- > Resumes, LinkedIn profiles, bios, and letters that get interviews. > By-the-hour resume and LinkedIn coaching. > Other professional writing services. > http://www.resumespecialties.com/ > www.linkedin.com/in/patrickmooreresumespec/ > Patrick Moore > Alburquerque, Nouvelle Mexique, Vereinigte Staaten > > ************************************* > *The point which is the pivot of the norm is the motionless center of a > circumference on the rim of which all conditions, distinctions, and > individualities revolve. *Chuang Tzu > > *Stat crux dum volvitur orbis.* Carthusian motto > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
