I have a nice 63cm blue/cream Hilsen that is slightly to big for me. Care to trade?
On Thursday, December 17, 2015 at 7:30:05 PM UTC-7, Mark Beaver wrote: > > Hi, I'm selling my 2000 Rivendell Road Standard frameset (frame and fork > and headset). This frame was built in early 2000 for a friend of mine who > used it for a season then hung it up for a decade - I got the frame from > him a couple of years ago - but it's just too small for me, so time to let > it go to someone who will cherish it. > > The frame is serial number JS0003, meaning the third frame build in the > year 2000. It has original Joe Bell paint, in remarkable condition for a > frame of its age, as I doubt it has 1000 km on it - certainly I only rode > it for three or four hundred. The frame is 60 cm center to center, top > tube is 58 cm. The top tube has a slight up-slope toward the front, and > there is a 2.5 cm custom machined spacer in the Tange Gyromaster roller > bearing headset. Wheelbase is 1015cm or 40.0". > > The original owner sealed all of the vent holes with beeswax. The brakes > are "short reach" 49 mm with the pads set all the way down. One could run > 32 mm tires or 28 mm tires with fenders. Seatpost diameter is of course > 27.2mm. Color is dark dark royal blue and cream. There is a small scratch > on the seat lug above the allen bolt, and a small scratch on the left side > of the top tube, and that's it - other than the ubiquitous marks where the > wheels are clamped into the dropouts. > > The ride quality is Rivendell - it's one of the nicest riding bikes I've > ever been on. I'm not sure if the tubing is the Reynolds 753 as Rivendell > custom's used designer-selected tubing but it rides wonderfully. The top > tube is oversized 28.6 mm and the seat tube and down tube are standard > sized 28.6 mm. > > Link to the photos is > https://www.flickr.com/photos/markbeaver/albums/72157662458427456 > > Looking for $1250 + actual cost shipping, which should be in the $50 - > $100 range depending on your location. Contact me at markbeaver61 <at> > gmail.com if you're interested. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
