The long stays might mean you need more tension on the chain than you would
otherwise. I'd look into a clutch style MTB mech. Otherwise, the GS is
the short-cage Shimano and you may be better off with the SGS which wraps
more chain.
On Monday, November 14, 2016 at 9:47:59 AM UTC-5, Jonathan Anderson wrote:
>
> Hi there, my wife and four month old son were away this weekend so I had
> little choice but to tinker with the Clem. This tinkering amounted to
> installing an old RD that I had in my parts bucket from an old MTB.
> Straightforward enough, right? Sort of. Upon rerouting the chain, I noticed
> that I had considerable slack ('droop') in small/small. **Without checking
> big/big, I promptly removed a link and reattached the KMC quick link. Still
> droopy. Removed another link. Passable. Happy.
>
> But on my ride yesterday afternoon I noticed some noise when shifting to
> big/big to get up a small hill. 'Cross-chaining.....' I know, but it was a
> small hill and it's more practical to shift 'down' a couple to get over it
> vs. having to shift down in the front and up in the back... Following?
> Anyway, I heard the noise and made a note to check when I returned. I
> believe the sound, which is not overly pronounced, but audible is due to
> the RD being pulled pretty far out and adding additional tension to the
> chain (photo below).
>
> Q (finally...), is this too much tension? It's a GS RD, so it's rated for
> 33T capacity vs. the 37 on the Clem. Should be fine? In retrospect, I
> should have left one additional link on the chain as I never ride
> small/small. But I didn't think that far ahead. Question is whether I can
> get away with it the way it is. If not, I have no idea where to find a
> chain long enough to fit the clem stays....
>
> Appreciate your thoughts.
>
>
> <https://lh3.googleusercontent.com/-_O64bCBQtD8/WCnNbgec4FI/AAAAAAAAFcg/TSR-RRKZKc0Rx0GcNTlufCBACLJJb-5fgCLcB/s1600/IMG_4374.JPG>
>
>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.
