Eh, looking again, I think 32 with fender may be *too* tight unless a funky bridge-interruptor type fender. So 28 is the largest I'd say OK with, say, VO hammered fenders.
-- todd On Friday, February 10, 2017 at 11:31:25 AM UTC-8, Todd Fahrner wrote: > > Thank you, Tim, for providing detailed geometry. I confirm this is a 57cm > Road Standard. Prior to actually fitting said tires and fenders, it's hard > to say for sure what will fit, but my good-faith guess is that it will fit > 35s without fender, 32 with fender (tight) and 28 with fenders no problem. > Yes, there are eyelets. > > Owning a bike shop, can fit these in advance to confirm: you specify > tire/fender; will charge wholesale. It's got 32 Paselas on there now. > > -- > todd > > On Friday, February 10, 2017 at 6:18:00 AM UTC-8, Tim Gavin wrote: >> >> Here's the geometry sheets for the 1st generation Rivendell frames, >> including the Road Standard. >> http://www.cyclofiend.com/rbw/gen1/#catalog5 >> <http://www.google.com/url?q=http%3A%2F%2Fwww.cyclofiend.com%2Frbw%2Fgen1%2F%23catalog5&sa=D&sntz=1&usg=AFQjCNFvNXuqcHWprDHrVJtk1ARbWHkiXw> >> >> Tire clearance is supposed to be up to a 700 x 35, but there seems to be >> some variation on this. My '97 Road Standard 59 cm, for example, has very >> tight tire clearance. A 700 x 28 barely fits, anything larger will rub. I >> like it on 650 x 38 wheels, though that results in a very low BB. >> >> Todd, I'm curious about the tire clearance as well. >> >> Cheers, >> Tim >> >> On Fri, Feb 10, 2017 at 7:42 AM, Belopsky <belopol...@gmail.com> wrote: >> >>> Can you provide some measurements? What's the biggest tire this will >>> fit? Fender mounts? >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "RBW Owners Bunch" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to rbw-owners-bun...@googlegroups.com. >>> To post to this group, send email to rbw-owne...@googlegroups.com. >>> Visit this group at https://groups.google.com/group/rbw-owners-bunch. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
