I was thinking that the clamps were on the non-bulged portion of the bar, therefore not requiring a special handlebar.
On Wednesday, April 12, 2017 at 3:37:10 PM UTC-4, Bill Lindsay wrote: > > Shoji asked what bars would fit that stem. > > I'm expecting to use the bar that Grant planned on me using. I am not > expecting to pull a bar from my pile. I believe that all the bars you > listed are not going to fit, because the bulged part is too narrow. We > will all see at the end of the month, I expect, and if you are eager to > find out immediately, give them a call. It's rainy today, so I expect they > are not too busy. > > Bill > > On Wednesday, April 12, 2017 at 12:10:52 PM UTC-7, Shoji Takahashi wrote: >> >> Hi Bill, >> >> "Folks who want to run a particular stoker bar that might not be the >> right diameter for two clamps at that width." >> >> Would the stoker stem work with Bosco? or Albatross? or Choco? Aren't >> those bars less than 25.4mm diameter (away from the central stem area)? >> >> Thanks, >> Shoji "who's also waiting on a small sage HHH" >> Arlington MA >> >> >> >> On Wednesday, April 12, 2017 at 2:52:12 PM UTC-4, Bill Lindsay wrote: >>> >>> I am just guessing about this, but to my eye it looks like an existing >>> Cromo Albatross probably will not fit on this stoker stem. The bulge part >>> on a Cro-Mo Albatross is pretty narrow. The two clamps of this bullmoose >>> stoker stem look pretty wide. >>> >>> It is my guess (and it is only a guess) that the bar pictured in the >>> stoker stem is a prototype for the forthcoming "NEW" Albatross. The >>> "pneubar". The "NooBar". The bar that they have not settled on a name >>> for. >>> >>> BL in EC >>> >>> On Wednesday, April 12, 2017 at 11:00:49 AM UTC-7, lconley wrote: >>>> >>>> I love it. I am going to use the Nitto Fairweather Bullmoose handlebar >>>> (TIGd) for the front, so this will end up basically matching it in style. >>>> I >>>> have some Cro-Mo Albatrosses also. >>>> >>>> >>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
