Hi Shoji, Thanks for this link, i had not seen it before. in this example, isn't he basically running a wire from the fork to the bottom bracket, and then only running 1 wire to the rear light (for power). so by screwing into the bottom bracket, will the rear tail light ground through the mounting stud? what if i'm using aluminum fenders, won't i then need to run a ground wire all the way to the light?
On Thursday, October 19, 2017 at 1:56:31 PM UTC-4, Shoji Takahashi wrote: > > Hi Minh, > To ground at the back of the bike, you can attach it to, for example, the > bottom bracket cable guide, the fender mount point (near the bottom > bracket), the downtube cable stop. > > AT uses the bottom bracket cable guide in his Lyon: > https://flic.kr/p/oVhx9F > > Good luck! > shoji > > > > On Thursday, October 19, 2017 at 11:20:09 AM UTC-4, Minh wrote: >> >> So i've never understood/tackled grounding through the frame, i've always >> run a 2 wires from the front light. I recently picked up a VL tail-light >> and the instructions say that it grounds through the stud, so if i already >> have 2 wires in the back (from previous light), do i just attach my ground >> wire to the stud--via a ring/clip? >> >> I have AL fenders, so If i wanted to shorten the ground wire run from the >> front front of the bike and ground to the frame, where would i run a wire >> to ground to the frame at the back of the bike? Thanks for any help! >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.