Hi all, I picked up a hanging edelux2 recently and it's one of the earlier ones that do not support a tail-light direct connected to it--there's no extra port. I know that means i can't wire the tail-light thru the headlight so that it turns off/on with the headlight. But can i still wire the tail-light into the hub power and ground IF i'm ok with the headlight always being on? I know there's some risk if the headlight were to fail or go-out that i would burn out the tail-light, but is there anything else i'm missing with this?
as far as wiring, can i tap into the power lead going from the hub to headlight or do i need to run a wire from the tail-light back to the hub? thanks for any help, i always like to double-check/confirm when it comes to wiring! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.