Marty Did you use the Pletscher stays with the Nitto stay bolts or did you use Nitto stays? Can you provide a close picture of the rack and the stays? Really a nice concept and execution.
I have 3 old Pletscher racks and would love to try this on one of them. What model did you modify? John Hawrylak Woodstown NJ On Tuesday, May 28, 2019 at 4:58:23 PM UTC-4, Marty Gierke, Stewartstown PA wrote: > > For the rear rack, I drilled out the riveted stays on the Pletscher, > enlarged the holes a touch, and the Nitto stay bolt thingies made the job > easy. I also drilled a hole in the middle of the bracket at the bridge. The > frame has a flat there, so no need for a concave bridge washer. The rack is > very light, no good for panniers or a heavy load, but would work great as a > bag support or a modest rack top bag. You can also see I had to raise the > brake saddle to clear the rack, but it was no problem as I had an orphan > Moon Unit. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/d0276fc8-f022-499b-8713-e0f230b220d9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
