You going Hite-Right? On Wednesday, October 23, 2019 at 1:06:24 PM UTC-7, Clayton.sf wrote: > > Interesting. Would definitely want to fill the hex bolt space to avoid > effin up the paint. > > Guess a trip to the hardware store is in the near future. > > CSHBGCA > > > > On Wednesday, October 23, 2019 at 12:20:11 PM UTC-7, Garth wrote: >> >> >> The QR that Riv uses are not anything special, I asked. They clamp >> on/over each side in total. The hex bolt space doesn't get filled in, so if >> perfect paint is your thing this is not for you as it's gonna get scuffed. >> >> I'd get a steel one myself, like this : >> >> https://thebikeshopstore.com/categories/sunlite-seat-binder-quick-release-6-x-50-60mm-chromoly-steel >> >> >> <https://cdn11.bigcommerce.com/s-804sw/images/stencil/500x659/products/39270/318240/51299__05772.1403893389.jpg> >> >> >> >> >> >> >> On Wednesday, October 23, 2019 at 1:33:43 PM UTC-4, Clayton.sf wrote: >>> >>> Hi All, >>> >>> Has anyone successfully added a Quick Release Seatpost binder to a >>> Rivendell frame? >>> >>> I feel like I know what I need in general. QR that is long/short enough >>> that mates with the nut on the other side and some spacers/washers that fit >>> into the space where the hex bolt head usually sits. What I don't (yet) >>> know is what exactly I should use. If anyone has setup that they like >>> particularly well let me know. It will likely save me some trial and error. >>> >>> Thanks, >>> Clayton Scott >>> HBG, CA >>> >>
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/aab295bb-7471-430c-9aa6-96f96fe94f0d%40googlegroups.com.
