Inside the fork routing of wires utilizing a th SL connector in the dropouts of the fork is definitely very cool. But this requires the fork be built custom. In my opinion, the co-axial connection is far preferable to the internal wire routing and the dropout connector. The coaxial connector has the advantage of being adaptable to almost any bike. I had Peter White cut my coaxial wire to a custom length and put in a Y-junction, enabling my wife to charge her iPhone on our Hubbuhubbuh. Check out Corwin's Hubbuhubbuh on the Blug: https://rivbike.tumblr.com/ . The Y-junction and the Sinewave charger are visible in the second and third photos respectively. The co-axial connectors are also much easier to remove and attach to the Schmidt hub than the spade connectors.
Namaste, Corwin On Friday, February 28, 2020 at 9:21:10 AM UTC-8, Bicycle Belle Ding Ding! wrote: > > In yesterday’s newsletter from Rivendell there was a botched custom for > sale. Will wrote about “newfangled dropouts that allow for wireless dyno > lighting” and I have never heard of such a thing. I know next to NOTHING > about dyno, except that I really, really want it for my upcoming bike > because I’m tired of dead batteries, Who can tell us (me) about this new > wireless system and the dropouts it requires? And whatever else you want to > contribute will be valuable, too. > > In thanks, > Leah -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/aead08a6-cdc5-454e-a25c-a1a1f81df289%40googlegroups.com.
