Could you tell us what front and rear cable hangers you used - brand and model. You'd think they were easy to find but here... I have a pair of the regular Paul's center-pulls I'd like to use. Thanks
On Apr 10, 4:55 pm, stevep33 <steve...@gmail.com> wrote: > I just installed a set of the Paul Racer M brakes, the center mount > high polish one's, on my Rambouillet. Major piece of bike bling. > They replaced a pair Tektro R538's. The Tektro's worked well and there > was just enough clearance for Honjo 41mm fenders and Grand Bois 30's. > That said, the Paul brakes are a nice upgrade: better clearance, more > power and very pretty. Installation was pretty straight-forward once > I found a rear cable hanger short enough for my 56cm frame and an in- > line cable adjuster. I haven't fiddled too much with the brakes yet, > not having had time to ride any significant distances, but I already > like these brakes after a short trip around the block. The brake pads > may need some toe-in still. Tomorrow or the next day should allow > time for a full test ride. > > I put together a set of photos on my > Flickr.http://www.flickr.com/photos/27988...@n06/sets/72157623702627095/ -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.