My experience on a 52cm Clem with Boscos was much the same: contact only at very slow speeds--like U-turn-on-a-sidewalk slow. It was never a practical problem for me, even as someone who strongly dislikes toe overlap. On Saturday, June 27, 2020 at 10:48:42 AM UTC-7 Mark Roland wrote:
> I have a 52cm El Clem, aka Clem L, with bullmoose Boscos. I also have > regular Boscos on my 26" Santana tandem. I use stem shifters on El Clem and > bar end shifters on the tandem. I haven't experienced any knee hits, even > when standing and sprinting for the line. (Okay, standing to power up an > incline). > > Sounds like you are still in the process of building the bike up. If > that's the case, it can be hard to estimate this kind of thing by just > turning the bars and noting how close they get. That's because the bars > rarely turn that much, except maybe at really slow speeds--that's the > reason toe overlap with the wheel is generally not an issue until you are > putting along. > > If they do hit, you have options. You could cut down the bars as necessary > to prevent the issue--this kind of makes sense on a 45cm, in terms of being > proportionate. Or you could go with an on the bar shifter, or stemmies. Or > you could switch to bars with less back sweep. > > On Saturday, June 27, 2020 at 11:53:45 AM UTC-4, BlackBomber wrote: >> >> I'm in the process of building up a Clem H with 55cm Boscos, and a 115mm >> reach "7" stem. The stem is a placeholder until my 120mm Tallux comes in, >> but that won't give much more room. Note that a 45cm complete would have >> come with the shorter 110mm stem. Anyway, it seems like the bars and my >> knees will be in conflict on some turns. Something I'm familiar with >> (owning a couple of pre-WWII American bikes). I also have bar end shifters, >> although I think it would be a problem with thumbies, also. The bars are >> raised with the grips resting about an inch higher than my seat, and maybe >> a 10-12 degree rotation back. I'm 5'4" with a 79cm PBH on a 45cm frame. It >> was a toss up between the 45 and 52, and I felt more comfortable with the >> idea of a 45 as 52 is just about where I feel comfortable on a road bike, >> and I wanted more standover. Plus my converted MTB build I'm replacing has >> the same top tube length as my Clem, and I feel great on that bike. >> >> So my question is, when properly fitted, do these bars interfere with >> knees in real world riding, or did I pick the wrong size frame? >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/3cd5d90b-7dde-4690-86c1-cb53beac9bacn%40googlegroups.com.