Shifters are sold (thanks James!). Only the stems remain:
*Clockwork custom quill stem. *31.8 clamp diameter, removable faceplate, 80mm extension and some upward angle (20 degrees?). Bought from a list member who had it built for his Hunqapillar and Jones Bar combination. Think of it as a chromed (and cheaper!) version of Riv’s new “Faceplater” stems. Good condition. Some scratches and signs of wear on the chrome and small amount of rusting in the clamp area. $65 shipped. *Nitto Pearl quill stem.* Fair condition—some scratches and dings from use. 100mm extension and 25.4 clamp diameter. This seems like an older version with lovely knurling on the two bolts and a disc “plug” instead of the typical wedge to expand the stem in the steering tube. $40 + shipping. On Thursday, February 4, 2021 at 4:10:25 PM UTC-7 John M wrote: > > Quick update. Both racks are now sold (thanks Jared and Dave!). Items > remaining: > > Photos here: PHOTOS! > <https://drive.google.com/drive/folders/1mObvTwdyu_fHLUBW3iFsepmG45RxfqQJ?usp=sharing> > > *Silver Shifters v1*. Excellent condition. Used on the Hunq for about > year before switching over to bar-ends. $40 shipped. > > *Clockwork custom quill stem. *31.8 clamp diameter, removable faceplate, > 80mm extension and some upward angle (20 degrees?). Bought from a list > member who had it built for his Hunqapillar and Jones Bar combination. > Think of it as a chromed (and cheaper!) version of Riv’s new “Faceplater” > stems. Good condition. Some scratches and signs of wear on the chrome > and small amount of rusting in the clamp area. $65 shipped. > > *Nitto Pearl quill stem.* Fair condition—some scratches and dings from > use. 100mm extension and 25.4 clamp diameter. This seems like an older > version with lovely knurling on the two bolts and a disc “plug” instead of > the typical wedge to expand the stem in the steering tube. $40 + shipping. > > > > > On Thursday, February 4, 2021 at 2:44:43 PM UTC-7 duh...@gmail.com wrote: > >> Interested in R-14, will direct message as well. >> >> Jared >> >> On Thursday, February 4, 2021 at 11:59:38 AM UTC-8 John M wrote: >> >>> I recently “re-homed” my Hunqapillar frameset and need to sell off some >>> parts before my innate urge to hoard overwhelms my latent good sense. >>> Paypal friends and family is preferred. Thanks! >>> >>> Photos here: PHOTOS! >>> <https://drive.google.com/drive/folders/1mObvTwdyu_fHLUBW3iFsepmG45RxfqQJ?usp=sharing> >>> >>> *Silver Shifters v1*. Excellent condition. Used on the Hunq for >>> about year before switching over to bar-ends. $40 shipped. >>> >>> *Clockwork custom quill stem. *31.8 clamp diameter, removable >>> faceplate, 80mm extension and some upward angle (20 degrees?). Bought from >>> a list member who had it built for his Hunqapillar and Jones Bar >>> combination. Think of it as a chromed (and cheaper!) version of Riv’s new >>> “Faceplater” stems. Good condition. Some scratches and signs of wear on >>> the chrome and small amount of rusting in the clamp area. $65 shipped. >>> >>> *Nitto Pearl quill stem.* Fair condition—some scratches and dings from >>> use. 100mm extension and 25.4 clamp diameter. This seems like an older >>> version with lovely knurling on the two bolts and a disc “plug” instead of >>> the typical wedge to expand the stem in the steering tube. $40 + shipping. >>> >>> *Nitto Mini Front Rack 32F.* Good condition. This is a small front >>> rack that mounts to fork braze-ons (or “P-clamps”) and through the fork >>> crown. As seen here: >>> https://www.rivbike.com/collections/racks/products/nitto-mini-front-rack-32f-20020. >>> >>> This version has the front light mount. $85 shipped. >>> >>> *Nitto R-14 Rear Rack.* Good condition. Long rack struts are >>> approximately 34cm while the shorts are about 13cm and bent. This was >>> attached to my 54cm Hunqapillar frame using the upper and mid seat-stay >>> mounts and cleared the 2.25 knobby tire I was using. $95 shipped. >>> >>> >>> Thanks for looking! >>> >>> John >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/6505330c-83f6-4bca-9ab0-9331751822ddn%40googlegroups.com.
