Assumptions based on bar type sure are foggy. Drop bars can be mounted on 
almost anything and not limiting of shifters, thumbs have been mounted up 
on the flats and Genevalle puts them on brake levers. 

I suspect IRD's differentiation is about bottom bracket width and "drop 
bar" being equated to 68mm "road" BB standard. Some road FDs just don't 
have the outward throw to go to the big ring and the extra 5 mm that 73mm 
BBs require. It's an odd thing for a maker/marketer of them to be discrete 
about, or not know outright when you ask them to differentiate.

Andy Cheatham
Pittsburgh

On Saturday, February 6, 2021 at 11:23:06 PM UTC-5 Joe Bernard wrote:

> I did some searching on this and what I see is IRD says it's optimized for 
> Shimano STI road shifters and can work with Campy Ergo, too. The "dropbar" 
> nomenclature is a bit deceiving, it's the shifters most folks use on drops 
> they're concerned with because the derailleur has to work with front 
> indexing. Assuming that fd works with the chainring sizes you're using, 
> it'll be fine with any friction shifter. 
>
>
>
> On Saturday, February 6, 2021 at 7:12:00 PM UTC-8 samcr...@gmail.com 
> wrote:
>
>> Howdy,
>>
>> I recently purchased Riv's Silver triple crankset and I look forward to 
>> getting it spinning soon. I'm looking to buy a front derailer, and I 
>> reached out to Riv for recommendations. One of them was the IRD Alpina, 
>> which I'm sure some (or many) of you ride with. 
>> Here's the thing - when I look at the IRD "Alpina-d" online, I've read 
>> that it's "only compatible with drop bars." I reached out to IRD, they say 
>> this is so. (To be fair, I didn't think to ask the "why".) I've seen the 
>> "Alpina-f" is for flat bars, but no one has them in stock any more, and the 
>> IRD website only lists one version of the derailer (pictured as the 
>> "Alpina-d".
>>
>> What I'm riding - flat/semi-swept back bars (and perhaps even more swept 
>> back bars some day), with the triple crank and thumb shifters in friction 
>> mode, and a bottom pull set-up on my frame. Will this IRD Alpina-d front 
>> derailer work with my set up? Any experience and wisdom is much 
>> appreciated. Thanks much! 
>>
>> -Sosa
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/ac97b557-eb26-4a8b-af2a-f2c0d1bfc2a4n%40googlegroups.com.

Reply via email to