Ok, I should have researched first. I cannot comment on the "SPD" pedal. My feedback would only related to "Step-In A" pedal that Rene Herse does not carry!
On Thursday, June 3, 2021 at 10:15:41 AM UTC-4 Ginz wrote: > I had the MKS Urban Step-in B and Lambda combination for a while. These > are my thoughts: > > I really did not like the Step-in B pedals. I am a Time ATAC lover and > that fact that the MKS used the same cleats was a huge plus. However, I > found the break-in period for the Step-in B pedals was incredibly long. I > messed with the spring tension. I was using well broken in cleats. But it > took a long, long time before the the clip-in was smooth. At the > beginning, I had to jam my foot down, forward, backward, every which way to > engage the cleat. Once that issue resolved itself over ~20 rides, they > were better. But my goal was to swap between mtb'y pedals and flat > pedals. On the trail, the engagement was no where near as nice as my Time > ATAC. So, I just gave up and sold the setup. > > That said, if your goal is to ride roads and occasionally swap pedals, its > fine. Maybe not perfect, but fine. One thing you can do is find the > discontinued Non-Ezy version of the MKS Step-in B pedals for cheap on eBay > and try them out. Actually, I may have a set missing the dust cap if you > are interested (I bought them for parts). > > I wish they had partnered with Time and made the basic ATAC pedal with the > MKS Ezy Superior Axle. I would have kept that setup forever. > > On Thursday, June 3, 2021 at 2:55:09 AM UTC-4 exliontamer wrote: > >> Not sure about the SPD quality difference. Also, I realized the SPD rinko >> system might use different adapters. >> >> On Wednesday, June 2, 2021 at 8:32:31 PM UTC-5 Patrick Moore wrote: >> >>> Thanks; I've thought of these. Questions: Does the system materially >>> increase Q? Is the MKS spd pedal anywhere near as good as mid and upper >>> level Shimano SPDs -- PD540, XT, XTR? >>> >>> Actually, ~$275 for MKS SPDs and Urbans and shipping isn't too bad, but >>> only if the MKS spds are good pedals. >>> >>> Thanks again! >>> >>> On Wed, Jun 2, 2021 at 3:10 PM exliontamer <rollu...@gmail.com> wrote: >>> >>>> These rink systems work and are pretty sick, they're just expensive. >>>> https://www.renehersecycles.com/product-category/components/pedals/ >>>> >>>> On Wednesday, June 2, 2021 at 3:50:33 PM UTC-5 Patrick Moore wrote: >>>> >>>>> Is there any well made, well functioning adapter to make an SPD pedal >>>>> into a platform that will take a standard Christophe clip? Rather than >>>>> swapping out my SPDs for quills, this might be the best solution for >>>>> merely >>>>> occasional street shoe riding. >>>>> >>>>> Thanks. >>>>> >>>>> >>>>> -- >>>>> >>>>> ----------------------------------------------------------------------- >>>>> Patrick Moore >>>>> Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "RBW Owners Bunch" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to rbw-owners-bun...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/rbw-owners-bunch/27e254cb-ecd6-43fa-b974-0439d231b078n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/27e254cb-ecd6-43fa-b974-0439d231b078n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> >>> >>> -- >>> >>> ----------------------------------------------------------------------- >>> Patrick Moore >>> Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum >>> >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/51a9f1e1-5d8a-496a-aff4-cba70bcdd665n%40googlegroups.com.
