I find myself with one too many bicycles and it's a last in, first out kind of situation. For sale is a 62cm Hunqapillar frame, fork, and FSA Orbit headset, and I will throw in the Thomson Elite seatpost and Velo Orange 63mm fluted fenders. I bought the frame/fork/headset used last summer, built it up and rode it occasionally for the past ~9 months. The seatpost and fenders were new as of last Fall. The fenders are basically installed, and include a hole in the front fender that lines up with the eyelet on a Nitto 32F front rack for more support.
Stated geometry can be found here: https://flic.kr/p/7NnxMg That also links to the Hunqapillar group on Flickr, which has a number of shots from the original flyer with other useful information. I suspect that the top tube is slightly longer than the stated geometry, just from comparing its fit against my other similarly sized bikes. Being a first generation, its tire clearance is more limited than the later generations. I would say it fits 700x52/29x2.1" without fenders, 700x45 or maybe slightly wider with fenders, depending on rim width. It's biggest imperfection is a large chainsuck scar on the drive side chainstay, which was preexisting when I acquired it. Before building it up I sanded it smooth and hit with some spray on clear coat to discourage rust. In my formerly professional opinion it's not structural concern, but like most things, good to keep an eye on. See picture at the link below below. Aside from that there are a couple of very small shellac drips on the top and diagatube, otherwise in really good shape. Pictures of what's for sale here: https://flic.kr/s/aHsmW5Fche Pictures of it built up: https://flic.kr/s/aHsmQUkEX8 My saddle height is around 790mm for reference. Asking $1,500 for everything pictured. I'm located in Sacramento, CA and would be happy to do a local exchange here or in the SF Bay Area. Can also ship at buyer's expense. Missed out on an Appaloosa? Curious about older, shorter-chainstayed, fat tire Rivs? Now's your chance. -Jeremy Till Sacramento, CA -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/78de4085-1b93-4b9a-8142-bcf9d33d18a2n%40googlegroups.com.
