I had my 1971 Gitane Tour de France original seatpost replated, my Brooks B-68 saddle frame plated, and my 1963 Falcon 260 V8 valve covers plated at Spacecoast Plating & Metal Refinishing in Melbourne, Florida. They did a great job on everything. https://www.spacecoast-plating.com
Laing Delray Beach FL On Tuesday, July 27, 2021 at 9:27:11 AM UTC-4 David Wadstrup wrote: > Hello everyone, > > I couldn't find a horizontal 17/32 degree stem for my treadless setup on > my Roadeo, that would accept both the correct steerer tube and the Noodles > that I love so much, so had to have one custom-made. It's beautiful and is > raw steel. I couldn't find a plater at the time, and because I wanted to > get to riding this bike ASAP I mounted it as is, applied a few coats of > Renaissance Wax and hopped for the best. It's been on there for a quite a > while now, and the maintenance is getting to be a little much. I just > can't keep myself from holding the stem when moving the bike around, and > wherever I touch it, rust soon develops. Anyways, I need to get it plated. > I can't find anywhere local here in Maine that I can bring it to, and > figure that since I'll have to ship it, I can ship it anywhere. I'd just > like to feel confident that I'm sending off to someone who I can trust to > do a good job and to someone that won't plate the inside of the tube. This > is all a round about way of asking.... Does anyone have any > recommendations? Here's a couple of photos in case you're interested: > > [image: IMG_1073.PNG] > > [image: IMG_1074.PNG] > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/8217a19d-4560-4cc2-961b-ea50b135731fn%40googlegroups.com.
